Home »
Academic Articles & Research Papers
Showing 20 of 3,028 academic articles
PENG Heng, DONG Minghui, ZHANG Maoqi, BAI Mingxian, GUO Jianwei • Cailiao Baohu
(2026)
Sealing is a core factor for the safe operation of high-pressure proton exchange membrane electrolysis cells(PEMECs).To investigate the corrosion behavior of sealing polymer materials，two experimental methods were established: an accelerate...
DOAJ
Open Access (DOAJ)
DOI: 10.16577/j.issn.1001-1560.2026.0015
ZHANG Yi, YANG Qiang, YANG Lin, WANG HaiJuan et al. • Jixie qiangdu
(2022)
Combined with the high pressure and high temperature working condition and the characteristics of tooth and sliding ring combined seal, the mathematical model of the rotating slip ring type combined seal is established based on the theory o...
DOAJ
Open Access (DOAJ)
Jiaquan Li, Kai Wang, Yijiao Jiang, Jun Huang et al. • Small Science
(2023)
Single‐atom catalysts (SACs) composed of atomically dispersed metal‐active sites embedded in supporting substrates are attracting increasing attention in liquid‐phase selective oxidation reactions with joint merits of both advanced catalyti...
DOAJ
Open Access (DOAJ)
DOI: 10.1002/smsc.202300079
Gamze Bilgen, Omer Faruk Altuntas • Case Studies in Construction Materials
(2023)
The amount of waste materials such as dredged materials (DM) and waste glass (WG) have been growing exponentially since the middle of the 20th century. The most important problem created by them is the lack of space to be used for storage b...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.cscm.2022.e01815
Li Wei, Lei Zhao, Xun Zhu, Jihuan He et al. • Materials Research Express
(2024)
In this study, polylactic acid/graphene oxide/Dopamine (PLA/GO/DA) porous nanofiber membrane was prepared by electrospinning. L _16 (4 ^3 ) orthogonal experiment was designed to investigate the effects of reaction temperature, reaction time...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2053-1591/ad87b3
Javier Ruiz-del-Solar, Rodrigo Verschae, Mauricio Correa • EURASIP Journal on Advances in Signal Processing
(2009)
The aim of this work is to carry out a comparative study of face recognition methods that are suitable to work in unconstrained environments. The analyzed methods are selected by considering their performance in former comparative studies, ...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2009/184617
Hong Pei, Changhua Hu, Xiaosheng Si, Jianfei Zheng et al. • IEEE Access
(2019)
As the fundamental and prerequisite work of remaining useful life (RUL) prediction, degradation modeling directly affects the accuracy of RUL prediction. Existing degradation models are all developed under a single time scale, and less rese...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2019.2951804
Julles Mitoura dos Santos Junior, Adriano Pinto Mariano • Eng
(2024)
As one of the main industrial segments of the current geoeconomics scenario, agro-industrial activities generate excessive amounts of waste. The gasification of such waste using supercritical water (SCWG) has the potential to convert the wa...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/eng5020060
Jagadeesh Babu Veluru, Satheesh K. K., Trivedi D.C., Murthy V. Ramakrishna, Ph.D et al. • Journal of Engineered Fibers and Fabrics
(2007)
Electrospinning is one of the simplest techniques for obtaining polymer nano fibers. Nanofibers have large surface area to volume ratio and hence have excellent application potential in sensors, filter design etc. Polyaniline (PANI) is the ...
DOAJ
Open Access (DOAJ)
G Carbajal-Franco, E Rendón-Lara, I M Abundez-Barrera, A Vásquez-Aguilar • Materials Research Express
(2020)
The finding of a material with the precise properties needed to solve a specific issue is the first topic that needs unraveling when an application is projected. One approach to find a material with a specific property value is to study a d...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2053-1591/ab7b2b
Saman Mahmoodi, Hadi Tarimoradi • IEEE Access
(2024)
The growing emphasis on power quality has posed significant challenges for distribution system operators (DSOs). Among these challenges, short-term voltage fluctuations, specifically voltage sag, have drawn considerable attention. In this s...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2024.3476242
Allen E Ekkebus • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information)
(2007)
Oak Ridge National Laboratory hosted two workshops in April 2007 relevant to nuclear engineering education. In the Neutron Stress, Texture, and Phase Transformation for Industry workshop [http://neutrons.ornl.gov/workshops/nst2/], several i...
OPENALEX
Zhichao Tang, Jin Cui, Muzhi Yu, Weiqiang Zhu et al. • Materials & Design
(2022)
The diffusion growth of intermetallic compounds in Al-Er alloys are closely related to the properties of the alloys. The current work aims at explaining the dominance of Al3Er in the Al-Er alloys precipitation phases and the interface thin ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.matdes.2022.111341
Mengda Li, Yutian Cheng, Tongjun Yu, Jiejun Wu et al. • Materials & Design
(2019)
Stress-induced self-separation is one of the most efficient process for preparing native GaN substrate. The control of GaN film thickness is the key point for GaN film separating from substrate completely. Considering the bowing of bilayer,...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.matdes.2019.107985
Ahmed Abbasi, Abiy Tasissa, Shuchin Aeron • IEEE Open Journal of Signal Processing
(2021)
Unlabeled sensing is a linear inverse problem where the measurements are scrambled under an unknown permutation leading to loss of correspondence between the measurements and the rows of the sensing matrix. Motivated by practical tasks such...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/OJSP.2021.3083479
Jilong Zhao, Qing Wang, Qingfeng Han • IEEE Access
(2024)
In this paper, a novel axial flux reversal permanent magnet (PM) (AFRPM) machine, which combines the merit of the axial flux PM (AFPM) machine and flux reversal PM machine, is proposed. Meanwhile, according to the characteristics of the mac...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2024.3389699
Chunyu Ding, Yan Su, Shuguo Xing, Shun Dai et al. • International Journal of Antennas and Propagation
(2017)
In the process of lunar exploration, and specifically when studying lunar surface structure and thickness, the established lunar regolith model is usually a uniform and ideal structural model, which is not well-suited to describe the real s...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2017/3013249
Ivan Gundarovich Tananaev, G. A. Sarychev, Boris F. Myasoedov • Nanotechnologies in Russia
(2016)
Key results concerning large-scale application of nanomaterials in nuclear engineering are reviewed. The data on redox reactions of uranium and actinides in solutions and solid-phase transformations for the development of modern technologie...
OPENALEX
DOI: https://doi.org/10.1134/s1995078016010158
Ayyappan M, Muthiah A • Materials Research Express
(2026)
In this paper, melting and solidification characteristics of composite PCM filled inside the shell and tube heat exchanger were investigated experimentally. ZnO nanoparticles (NPs) were synthesized using the sol–gel method. Myristic acid (M...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2053-1591/ae44e7
Anita Mohanty, Subrat Kumar Mohanty, Bhagyalaxmi Jena, Ambarish G. Mohapatra et al. • IET Communications
(2022)
Abstract The delay in transportation of necessary items is due to traffic congestion throughout the world. This is a serious phenomenon which results in waste of time and fuel. The detection of road conditions and dissemination of traffic i...
DOAJ
Open Access (DOAJ)
DOI: 10.1049/cmu2.12344