Home »
Academic Articles & Research Papers
Showing 20 of 3,721 academic articles
Feng Hong, Xinsheng Wang, Dong Lu, Tingxi Meng et al. • Journal of Materials Research and Technology
(2026)
Ultra-thin metallic bellows are critical components in new energy vehicles and aerospace applications, yet their forming precision is significantly challenged by size effects when the wall thickness is reduced to the mesoscopic scale. This ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2026.09.159
Ya Yang, Chuanchang Li, Xiaonan Hou, Chunlei Wang et al. • AIP Advances
(2022)
Conventional spray particle detection methods have disadvantages such as spray field interference, large subjective standard error, and an inability to specifically analyze the spray particle movement. Manual methods used the uniformity of ...
DOAJ
Open Access (DOAJ)
DOI: 10.1063/5.0083129
Ammar Jafaripournimchahi, Yingfeng Cai, Hai Wang, Lu Sun et al. • Journal of Advanced Transportation
(2022)
In this study, a novel traffic flow modeling framework is proposed considering the impact of driving system and vehicle mechanical behavior as two different units on the traffic flow. To precisely model the behavior of Connected and Autonom...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2022/2253697
Hao Wang, Junfei Wu, Ping Fu, Xinle Song et al. • BioResources
(2026)
This study adopted a semi‑analytical CFD‑DEM coupling method to simulate the movement and deposition of lignin particles in ceramic membrane pores, with the aim of elucidating the microscopic mechanisms of membrane fouling. The movement of ...
DOAJ
Open Access (DOAJ)
Jiu Yu, Yubo Hu, Yaoxing Peng • Case Studies in Thermal Engineering
(2026)
The wick structure functions as a core component for heat pipe (HP) and stands as one of the critical factors that dictate the performance of HP. Consequently, this paper puts forward an three-segmented composite wick structure, which is ma...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.csite.2026.107724
Talha İkbal Çığır, Melih Hakan Samur, Mevlüt Yasin Igdeli • International Journal of Automotive Science and Technology
(2025)
This study compares the friction performance of three commonly used cast brake disc materials in the automotive industry: the G3000 variant, GG20, and GG15 (high carbon content). Samples were tested on an inertia dynamometer following the S...
DOAJ
Open Access (DOAJ)
DOI: 10.30939/ijastech..1811564
Seungjae Han, Taeyoung Oh, Soohyeon Lee, Siyeong Park et al. • Applied Sciences
(2025)
With continuous advancements in autonomous driving technology, systematic and reliable safety verification is becoming increasingly important. However, despite the active development of various X-in-the-loop simulation (XILS) platforms to v...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app15126545
Jung Yun Kee, Kook Tae Kim, In Hak Lee, Ilwan Seo et al. • Scientific Reports
(2024)
Abstract Interfacial magnetic interactions between different elements are the origin of various spin-transport phenomena in multi-elemental magnetic systems. We investigate the coupling between the magnetic moments of the rare-earth, transi...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-024-60076-9
Patrick Rufangura, Iryna Khodasevych, Arti Agrawal, Matteo Bosi et al. • Nanomaterials
(2021)
The mid-infrared (MIR) is an exciting spectral range that also hosts useful molecular vibrational fingerprints. There is a growing interest in nanophotonics operating in this spectral range, and recent advances in plasmonic research are aim...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/nano11092339
Dimitri P. Papazoglou, Amy T. Neidhard-Doll, Margaret F. Pinnell, Dathan S. Erdahl et al. • Metals
(2024)
In an effort to contribute to the ongoing development of ASTM standards for additively manufactured metal lattice specimens, particularly within the field of medicine, the compressive and tensile mechanical properties of biomimetic lattice ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/met14020232
F. S. Aghaei Maybodi, M. H. Heydari, F. M. Maalek Ghaeini, M. H. Akrami • پژوهشهای ریاضی
(2021)
Introduction
Many mathematical formulations of physical phenomena contain integro-differential equations. These equations arise in fluid dynamics, biological models, chemical kinetics, ecology, control theory of financial mathematics, aeros...
DOAJ
Open Access (DOAJ)
Hiroki Senshu, Takahide Mizuno, Toru Nakura, Ryo Suetsugu et al. • Progress in Earth and Planetary Science
(2025)
Abstract The spacecraft for the Japanese Martian Moon eXploration mission is equipped with a LIDAR laser altimeter. The slant range continuously measured by the LIDAR is used for the correction of the local topography and the orbit and atti...
DOAJ
Open Access (DOAJ)
DOI: 10.1186/s40645-025-00705-7
Wei Ma, Siping Zhai, Ping Zhang, Yaoqi Xian et al. • International Journal of Aerospace Engineering
(2018)
Liquid is overheated and evaporated quickly when it enters into the environment with lower saturation pressure than that corresponding to its initial temperature. This phenomenon is known as the flash evaporation. A natural low-pressure env...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2018/3686802
M. K. Mehta, M. Zaaijer, D. von Terzi • Wind Energy Science
(2024)
Traditionally, wind turbine and wind farm designs have been optimized to minimize the cost of energy. Such a design would make sense when bidding in price-based auctions. However, in a future with a high share of renewables and zero subsidi...
DOAJ
Open Access (DOAJ)
DOI: 10.5194/wes-9-2283-2024
Matthew Dvorsky, Daniela Munalli, Mohammad Tayeb Al Qaseer, Reza Zoughi • IEEE Open Journal of Instrumentation and Measurement
(2022)
In this paper synthetic aperture radar (SAR) polarimetry techniques are applied to detect and characterize fiber misalignment in both carbon fiber sheets and glass fiber reinforced polymer (GFRP) composites. The principle behind SAR polarim...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/OJIM.2022.3184347
CHEN Qiang, LI Shun, ZHU Li'an, BAI Shuxin et al. • Cailiao gongcheng
(2023)
As one kind of advanced high temperature structural and functional materials, it is necessary for fiber reinforced silicon carbide matrix composites (SiC CMCs) in the field of thermal management (TM) to combine the efficient heat transfer a...
DOAJ
Open Access (DOAJ)
DOI: 10.11868/j.issn.1001-4381.2023.000079
Majid Jamal-Omidi, Mohammad Reza Mohammadi Suki • Journal of Mechanical Engineering
(2018)
In this paper, effects of the defect in an adhesively bonded joint have been investigated using cohesive zone modeling. Consequently, a 3D finite element model of a single lap-joint is constructed and validated with experiments. Strength pr...
DOAJ
Open Access (DOAJ)
DOI: 10.2478/scjme-2018-0023
Giulia Pascoletti, Filippo Cianetti, Giovanni Putame, Mara Terzini et al. • Frontiers in Bioengineering and Biotechnology
(2018)
The Marchetti-Vicenzi's nail is an intramedullary device where six curved nails are kept straight by a closing ring in order to allow their insertion into the medullary canal of a long bone; in a following step, these nails stabilize the fr...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fbioe.2018.00174
Thenmozhi D, M. Eswara Rao, Ch. Nagalakshmi, RLV.Renuka Devi et al. • International Journal of Thermofluids
(2024)
The current study presents a novel examination of heat transfer properties in a magnetohydrodynamic (MHD) flow of Casson fluid across a porous stretching sheet, uniquely incorporating the effects of heat source and variable viscosity. Unlik...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.ijft.2024.100804
Miisa J. Tavaststjerna, Stephen J. Picken, Santiago J. Garcia • Advanced Materials Interfaces
(2025)
Abstract Micropatterned surfaces with both hydrophilic and hydrophobic regions are relevant for a wide range of applications from fuel cells to water harvesting systems. The preferential nucleation of water on hydrophilic regions can also b...
DOAJ
Open Access (DOAJ)
DOI: 10.1002/admi.202400838