Reset
Showing 20 of 553 academic articles

The geographies of cultural geography III

Divya Praful Tolia-Kelly • Progress in Human Geography (2012)

The doing of material geographies within the subdiscipline of cultural geography has been inspired by Jane Bennett’s (2010) account of Vibrant Matter. This review follows the various trajectories in recently published research in the field ...

OPENALEX Open Access DOI: https://doi.org/10.1177/0309132512439154

Spatiotemporal variation of the ecosystem service value in China based on surface area

Chaohui Yin, Qingsong He, Peng Xie, Yanfang Liu et al. • Ecological Indicators (2023)

The assessment of ecological assets is of great significance for protecting and using ecological resources. Traditional methods of ecological assets assessment, which adopt the planar area as the standard, often ignore the impact of the sur...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.ecolind.2023.110067

Statistical Optimization of Medium for Pullulan Production by Aureobasidium pullulans NCPS2016 Using Fructose and Soybean Meal Hydrolysates

Jinyu Yang, Yanhao Zhang, Shuangzhi Zhao, Qingxin Zhou et al. • Molecules (2018)

Pullulan, with its excellent characteristics of film-forming, water solubility, and biodegradability, is attracting more and more attention in agricultural products preservation. However, high pullulan production cost largely restricts its ...

DOAJ Open Access (DOAJ) DOI: 10.3390/molecules23061334

Industrial sewing as a creative resource in the clothing Surface Design project

Ana Cláudia de Abreu, Marizilda dos Santos Menezes • ModaPalavra e-periódico (2022)

The production of clothing has several operational steps, such as industrial sewing, which is used on textile surfaces as a materialization resource, that is, the union of two or more layers of fabrics by sewing points that makes the object...

DOAJ Open Access (DOAJ) DOI: 10.5965/1982615x15352022249

A study of aerodynamic noise in air duct systems with turning vanes

Rašuo Boško, Dinulović Mirko, Trninić Marta, Stamenović Marina et al. • FME Transactions (2021)

Noise is becoming one of the problems in many industrial applications. In this paper the aerodynamic noise in air duct system that arises from air flow passing over a surface of turning vanes is investigated. Based on Proudman's formula usi...

DOAJ Open Access (DOAJ) DOI: 10.5937/fme2102308R

Research progress of automated ultrasonic imaging detection technology for complex aircraft components

CHEN Yao, XIONG Zhenghui, LUO Junwei, WANG Hanyang et al. • Journal of Aeronautical Materials (2025)

Traditional ultrasonic automated non-destructive testing is a great challenge in the inspection of aviation components with complex surfaces. Complex surfaces can interfere with the formation of the focus in the sound beam,and the waveform ...

DOAJ Open Access (DOAJ) DOI: 10.11868/j.issn.1005-5053.2024.000173

Influence of Non - Condensable Gases on the Processes of Heat and Mass Transfer during Film Condensation of Steam in Heat Exchangers

Reshetnikov I.F., Shikhalev S.V., Tikhonov S.L. • Problems of the Regional Energetics (2018)

The aim of the article is a quantitative assessment of the influence of non-condensable gases on the intensity of heat and mass transfer processes during film condensation of steam in the specific conditions for heat exchanger. The task is ...

DOAJ Open Access (DOAJ) DOI: 10.5281/zenodo.2222362

Effect of Thermal Modification and Picture Varnish Application on Color Change of Scots Pine (Pinus sylvestris L.) Wood

Hüseyin Peker, Ümit Ayata, Göksel Ulay • Drewno (2025)

Scots pine wood represents one of the important tree species used by the wood processing industry in many countries for both interior and exterior applications. It is well known that thermal treatment alters the color of wood. To protect wo...

DOAJ Open Access (DOAJ) DOI: 10.53502/wood-201974

Formulation, characterization, and valorization of the antioxidant, antibiofilm, and anti-adhesion potentials of a clove essential oil nanoemulsion

Enis Ben Bnina, Jihen Missaoui, Mohamed Firas Gannouni, Lotfi Achour et al. • OpenNano (2026)

Food safety and control are fundamental public health issues that maintain consumer confidence and protection. This design (management) requires monitoring production, processing, and conservation processes while limiting microbiological, c...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.onano.2026.100286

Flat Plate based- Solar System with a tracking system

M. Abdunnabi, A. Abusalama, M. Algamil, M. Almontaser • Solar Energy and Sustainable Development (2018)

Water heating in Libyan domestic sector represents over 29% of the total electrical consumption. There is a great potential of hot water usage in the industrial and other sectors. Solar energy can play vital role in providing hot water to t...

DOAJ Open Access (DOAJ)

Recent progress in tailoring Ni-rich layered oxides via coating and doping strategies for enhanced lithium-ion battery performance

Ha Eun Kang, Seong-Do Kim, Young Soo Yoon, Sang-Jin Lee • Applied Surface Science Advances (2025)

Nickel-rich layered oxide cathodes, typified by compositions such as LiNi₁₋ₓ₋ᵧCoₓMnᵧO₂ (NCM) have garnered significant attention as high-energy-density candidates for next-generation lithium-ion batteries. However, their widespread deployme...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.apsadv.2025.100826

The electrochemical effects of pitch stabilization for supercapacitor-grade activated carbon precursors

Jeong Han Lee, Min Ju O, Yong-Mook Kang, Kwang Chul Roh • Electrochemistry Communications (2024)

Petroleum pitch (PP) is a by-product generated during the petroleum refining process, characterized by its high carbon content, tunable structure, and cost-effectiveness. These attributes have spurred extensive research into its potential a...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.elecom.2023.107638

Effect of Corrosion Product Films Induced by Tensile Stress on P110 Casing Steels Induced in CO2 Environment

Yangzhong Jing, Shuliang Wang, Yuyao Chen, Mingyu Bao et al. • International Journal of Electrochemical Science (2018)

Corrosion product films were formed on P110 casing steels by high-temperature and high-pressure autoclave in a CO2 environment induced by tensile stress. The effects of applied tensile stress on the protection characteristics and electroche...

DOAJ Open Access (DOAJ) DOI: 10.20964/2018.08.21

Dynamic Assembly of Microgels and Polymers at Non‐Aqueous Liquid/Liquid Interfaces

Xin Guan, Yang Liu, Lianwei Li, Man‐Hin Kwok et al. • Advanced Science (2025)

Abstract Particle assembly at liquid–liquid interfaces presents a promising bottom‐up strategy for creating supramolecular materials with advanced functionalities. However, the significantly lower interfacial tension observed in immiscible ...

DOAJ Open Access (DOAJ) DOI: 10.1002/advs.202415642

Microstructure and corrosion behavior of SLM–Ti6Al4V with different fabrication angles in F−-containing solutions

Yao WANG, Xiao-ying YAN, Cheng MAN, Hong-wei ZHANG et al. • 工程科学学报 (2021)

Selective laser fusion (SLM) is an emerging 3D printing technology that can greatly shorten the processing cycle and reduce the production cost of medical implants, thus offering broad prospects for application in the biomedical field. In a...

DOAJ Open Access (DOAJ) DOI: 10.13374/j.issn2095-9389.2020.09.29.001

Microstructure and corrosion resistance of Sm-containing Al-Mn-Si-Fe-Cu alloy

Han Yuyin, Ding Dongyan, Du Jiandi, Gao Yongjin • 上海师范大学学报. 自然科学版 (2017)

Optimizing alloy composition is an effective way to improve physical and chemical properties of automobile heat exchanger materials.A Sm-containing Al-Mn-Si-Fe-Cu alloy was investigated through transmission electron microscopy,scanning elec...

DOAJ Open Access (DOAJ) DOI: 10.3969/J.ISSN.1000-5137.2017.06.006