Reset
Showing 20 of 118 academic articles

Developing a Rational, Optimized Product of Centella asiatica for Examination in Clinical Trials: Real World Challenges

Kirsten M. Wright, Janis McFerrin, Armando Alcázar Magaña, Armando Alcázar Magaña et al. • Frontiers in Nutrition (2022)

Botanical products are frequently sold as dietary supplements and their use by the public is increasing in popularity. However, scientific evaluation of their medicinal benefits presents unique challenges due to their chemical complexity, i...

DOAJ Open Access (DOAJ) DOI: 10.3389/fnut.2021.799137

Bi‐Functional Materials for Sulfur Cathode and Lithium Metal Anode of Lithium–Sulfur Batteries: Status and Challenges

Ying Dou, Junling Guo, Junke Shao, Jiaozi Duan et al. • Advanced Science (2024)

Abstract Over the past decade, the most fundamental challenges faced by the development of lithium–sulfur batteries (LSBs) and their effective solutions have been extensively studied. To further transfer LSBs from the research phase into th...

DOAJ Open Access (DOAJ) DOI: 10.1002/advs.202407304

Improving Minutiae Image of Latent Fingerprint Detection on Non-Porous Surface Materials under UV Light Using Sulfur Doped Carbon Quantum Dots from Magnolia Grandiflora Flower

David Nugroho, Won-Chun Oh, Saksit Chanthai, Rachadaporn Benchawattananon • Nanomaterials (2022)

In this study, carbon quantum dots (CQDs) from Magnolia Grandiflora flower as a carbon precursor were obtained using a hydrothermal method under the optimized conditions affected by various heating times (14, 16, 18, and 20 min) and various...

DOAJ Open Access (DOAJ) DOI: 10.3390/nano12193277

Preparation of Modified Kaolin Filler with Cesium and Its Application in Security Paper

Houssni El-Saied, Samya El-Sherbiny, Omnia Ali, Wafaa El-Saied et al. • Advances in Materials Science and Engineering (2013)

In this study, cesium was added intentionally during paper manufacture for protecting the papers against forgery and counterfeiting by sorbing cesium ions (Cs+) on kaolin, used as special filler in papermaking. The sorption of cesium from a...

DOAJ Open Access (DOAJ) DOI: 10.1155/2013/274245

Negative emissions technologies and practices could challenge global resource supply and environmental limits

Selene Cobo, Ángel Galán-Martín, Gonzalo Guillén-Gosálbez • Communications Earth & Environment (2026)

Abstract Meeting climate goals will most likely require large-scale carbon dioxide removal, yet its sustainability implications remain poorly understood. Here, we conduct a prospective life cycle assessment of multiple negative emissions te...

DOAJ Open Access (DOAJ) DOI: 10.1038/s43247-026-03348-8

Comparative Study for Selective Lithium Recovery via Chemical Transformations during Incineration and Dynamic Pyrolysis of EV Li-Ion Batteries

Srija Balachandran, Kerstin Forsberg, Tom Lemaître, Nathália Vieceli et al. • Metals (2021)

Selective leaching of Li from spent LIBs thermally pretreated by pyrolysis and incineration between 400 and 700 °C for 30, 60, and 90 min followed by water leaching at high temperature and high L/S ratio was examined. During the thermal pre...

DOAJ Open Access (DOAJ) DOI: 10.3390/met11081240

Innovative polymer-based electrochemical platform for detecting ESAT-6 in human blood for pulmonary tuberculosis diagnosis

Xiu-An Ye, Shu-Hong Lin, Liang-Yu Chen, Jie-Ren Li et al. • Sensing and Bio-Sensing Research (2025)

Pulmonary tuberculosis (TB), caused by Mycobacterium tuberculosis (Mtb), necessitates early diagnosis for effective patient care. Despite advancements in TB diagnostics, there remains an urgent need to discover innovative non-sputum-based m...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.sbsr.2025.100816

Surface Modified Activated Carbons: Sustainable Bio-Based Materials for Environmental Remediation

Manoj Kumar Jha, Sahira Joshi, Ram Kumar Sharma, Allison A Kim et al. • Nanomaterials (2021)

Global warming and water/air contamination caused by human activities are major challenges in environmental pollution and climate change. The improper discharge of a large amount of agro-forest byproduct is accelerating these issues mainly ...

DOAJ Open Access (DOAJ) DOI: 10.3390/nano11113140

Development of Power-to-X Catalytic Processes for CO<sub>2</sub> Valorisation: From the Molecular Level to the Reactor Architecture

Luis F. Bobadilla, Lola Azancot, Ligia A. Luque-Álvarez, Guillermo Torres-Sempere et al. • Chemistry (2022)

Nowadays, global climate change is likely the most compelling problem mankind is facing. In this scenario, decarbonisation of the chemical industry is one of the global challenges that the scientific community needs to address in the immedi...

DOAJ Open Access (DOAJ) DOI: 10.3390/chemistry4040083

Recent advances in autonomous synthesis of materials

Yucen Li, Lingling Xia, Yiming Fan, Qinyue Wang et al. • ChemPhysMater (2022)

The synthesis of materials has been an important task throughout human history, and the ability to perform successful and efficient syntheses has been a factor in industrial revolutions and societal development. Recently, the rapid developm...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.chphma.2021.10.002

Soft Robotics

George M. Whitesides • Angewandte Chemie International Edition (2018)

This description of "soft robotics" is not intended to be a conventional review, in the sense of a comprehensive technical summary of a developing field. Rather, its objective is to describe soft robotics as a new field-one that offers oppo...

OPENALEX Open Access DOI: https://doi.org/10.1002/anie.201800907

4D printing of semi-crystalline crosslinked polymer networks with two-way shape-memory effect

Lorenzo Bonetti, Daniele Natali, Stefano Pandini, Massimo Messori et al. • Materials & Design (2024)

This paper introduces a novel approach to 4D printing tailored structures with reversible two-way shape-memory effect (SME) through material extrusion technology. To this aim, methacrylated poly(ε-caprolactone) (PCL) was synthesized and eva...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2024.112725

Color‐Filter‐Free Image Sensor Using CsPbBr3 Quantum‐Dot‐Based Tamm Plasmon Photodetector for Photonic Synapse Facial Recognition

Meng‐Cheng Yen, Yung‐Chi Yao, Chia‐Jung Lee, Shi‐Hui Huang et al. • Advanced Science (2025)

Abstract This study demonstrates that optical absorption of the CsPbBr3 quantum dots can be significantly enhanced through monolithic integration with the Tamm plasmon (TP) structure. This integration enables the resulting TP photodetector ...

DOAJ Open Access (DOAJ) DOI: 10.1002/advs.202503464

Quantum computing with molecular spin systems

J. Lehmann, Alejandro Gaita‐Ariño, Eugenio Coronado, Daniel Loss • Journal of Materials Chemistry (2008)

Molecular spintronics promises to combine the flexibility offered by synthetic chemistry with the advantages of an electronics which is based on the electron spin rather than its charge degree of freedom. Here, we review recent work on the ...

OPENALEX DOI: https://doi.org/10.1039/b810634g

Prospects of quantum computing for molecular sciences

Hongbin Liu, Guang Hao Low, Damian S. Steiger, Thomas Häner et al. • Materials Theory (2022)

Abstract Molecular science is governed by the dynamics of electrons and atomic nuclei, and by their interactions with electromagnetic fields. A faithful physicochemical understanding of these processes is crucial for the design and synthesi...

OPENALEX cc-by DOI: https://doi.org/10.1186/s41313-021-00039-z

Oxidation‐etching induced morphology regulation of Cu catalysts for high‐performance electrochemical N2 reduction

Xuqiang Ji, Ting Wang, Qian Liu, Yongsong Luo et al. • EcoMat (2020)

Abstract Renewable‐electricity‐driven N2 reduction is an attractive approach for ambient NH3 synthesis, but active electrocatalysts are needed to enable the N2 reduction reaction. Monolithic electrodes with active components anchored on con...

DOAJ Open Access (DOAJ) DOI: 10.1002/eom2.12026

Laser-induced porous graphene electrodes from polyketimine membranes for paracetamol sensing

Sabrine Baachaoui, Walid Mabrouk, Khaled Charradi, Bechir Slimi et al. • Royal Society Open Science (2023)

The development of cost-effective materials for fabricating electrodes is crucial for drug, pharmaceutical and environmental applications. This paper presents the synthesis and characterization of a novel polyketimine (PKI) membrane obtaine...

DOAJ Open Access (DOAJ) DOI: 10.1098/rsos.230294