Home »
Academic Articles & Research Papers
Showing 20 of 268 academic articles
Reshetnikov I.F., Shikhalev S.V., Tikhonov S.L. • Problems of the Regional Energetics
(2018)
The aim of the article is a quantitative assessment of the influence of non-condensable gases on the intensity of heat and mass transfer processes during film condensation of steam in the specific conditions for heat exchanger. The task is ...
DOAJ
Open Access (DOAJ)
DOI: 10.5281/zenodo.2222362
Hüseyin Peker, Ümit Ayata, Göksel Ulay • Drewno
(2025)
Scots pine wood represents one of the important tree species used by the wood processing industry in many countries for both interior and exterior applications. It is well known that thermal treatment alters the color of wood. To protect wo...
DOAJ
Open Access (DOAJ)
DOI: 10.53502/wood-201974
M. Abdunnabi, A. Abusalama, M. Algamil, M. Almontaser • Solar Energy and Sustainable Development
(2018)
Water heating in Libyan domestic sector represents over 29% of the total electrical consumption. There is a great potential of hot water usage in the industrial and other sectors. Solar energy can play vital role in providing hot water to t...
DOAJ
Open Access (DOAJ)
Han Yuyin, Ding Dongyan, Du Jiandi, Gao Yongjin • 上海师范大学学报. 自然科学版
(2017)
Optimizing alloy composition is an effective way to improve physical and chemical properties of automobile heat exchanger materials.A Sm-containing Al-Mn-Si-Fe-Cu alloy was investigated through transmission electron microscopy,scanning elec...
DOAJ
Open Access (DOAJ)
DOI: 10.3969/J.ISSN.1000-5137.2017.06.006
Wasim Jamshed, M. Prakash, S. Suriya Uma Devi, Rabha W. Ibrahim et al. • Scientific Reports
(2021)
Abstract A novel hybrid nanofluid was explored in order to find an efficient heat-transmitting fluid to replace standard fluids and revolutionary nanofluids. By using tangent hyperbolic hybrid combination nanoliquid with non-Newtonian ethyl...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-021-03392-8
Adam Grajcar, Maciej Różański, Sebastian Stano, Aleksander Kowalski et al. • Advances in Materials Science and Engineering
(2014)
This study is concerned with issues related to laser welding of Si-Al type TRIP steels with Nb and Ti microadditions. The tests of laser welding of thermomechanically rolled sheet sections were carried out using keyhole welding and a solid-...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2014/658947
Inés Pérez-Gonzalo, Florentino Alvarez-Antolin, Alejandro González-Pociño, Luis Borja Peral-Martinez • Journal of Manufacturing and Materials Processing
(2025)
This study investigates the mechanical, tribological, and electrochemical behaviour of a novel precipitation-hardenable martensitic alloy produced by selective laser melting (SLM). The alloy was specifically engineered with an optimised com...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/jmmp9080261
Muluken Biadgelegn Wollele, Harish H.V, Mebratu Assaye • Cogent Engineering
(2022)
Nanotechnology has opened up new avenues for industrial efficiency and performance. The Al2O3-Cu/water hybrid nanofluid with and without insert is analyzed numerically and validated to show heat transfer enhancement. A circular duct with in...
DOAJ
Open Access (DOAJ)
DOI: 10.1080/23311916.2022.2146627
Alaa Majeed, Rashed Rasheed • Journal of Applied Sciences and Nanotechnology
(2022)
Different iron oxide nanoparticles (Fe3O4 and Fe2O3) were prepared by the sol-gel method (titration). The prepared nanoparticles were heated at 90 and 400°C. The morphology surface and structures were characterized by Fourier Transform Infr...
DOAJ
Open Access (DOAJ)
DOI: 10.53293/jasn.2022.4574.1127
Bharat Bhushan, Neal Lane, James R. Heath • Springer handbooks
(2010)
OPENALEX
DOI: https://doi.org/10.1007/978-3-642-02525-9
James R. Heath, Mark E. Davis • Annual Review of Medicine
(2007)
The biological picture of cancer is rapidly advancing from models built from phenomenological descriptions to network models derived from systems biology, which can capture the evolving pathophysiology of the disease at the molecular level....
OPENALEX
Open Access
DOI: https://doi.org/10.1146/annurev.med.59.061506.185523
PMC: 3706454
A.M. Sirunyan, A. Tumasyan, W. Adam, F. Ambrogi et al. • Physics Letters B
(2020)
The fiducial cross section for Y(1S) pair production in proton-proton collisions at a center-of-mass energy of 13 TeV in the region where both Y(1S) mesons have an absolute rapidity below 2.0 is measured to be 79±11(stat)±6(syst)±3(B)pb ass...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.physletb.2020.135578
Mohammad Ridwan, Zulfiquar Ali Antor, Jeremy Ko, Mohammad Haseeb et al. • Waste Management Bulletin
(2026)
Municipal waste generation remains a persistent sustainability challenge, even in countries with strong environmental governance and circular economy ambitions. Yet it remains unclear how affluence, household final consumption expenditure a...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.wmb.2026.100394
• International business and management series
(2012)
Citation (2012), "International Business and Management", Hadjikhani, A., Elg, U. and Ghauri, P. (Ed.) Business, Society and Politics (International Business and Management, Vol. 28), Emerald Group Publishing Limited, Bingley, p. ii. https:...
OPENALEX
DOI: https://doi.org/10.1108/s1876-066x(2012)0000028025
Jonathan Heathcote, Fabrizio Perri • Journal of Monetary Economics
(2002)
OPENALEX
DOI: https://doi.org/10.1016/s0304-3932(02)00103-4
Zhigang Huang, Jiahui Wu, Tenglun Yang, Zihan Wang et al. • Foods
(2024)
The impact of COVID-19 has boosted growth in the takeaway and medical industries but has also generated a large amount of plastic waste. Peanut shells (PS) are produced in large quantities and are challenging to recycle in China. Co-pyrolys...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/foods13081191
Shihong Wu, Wei Yu, Yanxia Zhao, Hongyan Li et al. • International Journal of Cognitive Computing in Engineering
(2025)
Emergencies inflict heavy casualties, economic losses, ecological damage, and significant social harm to society. By segmenting information topics and analysing emotional shifts, we can identify corresponding real-world events and their imp...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.ijcce.2025.01.006
Yue Guo, Chenglong Wang, Abdelmalek Bouazza, Xuanming Ding et al. • Case Studies in Thermal Engineering
(2026)
Seasonal temperature fluctuations in cold regions induce freeze–thaw cycles that can significantly impact the structural safety and maintenance of tunnels. This study uses the Daban Mountain Tunnel as a case study to develop a full-scale nu...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.csite.2026.108518
Jeffrey P. Walters, Panick Kalambay, Philip F. Balyagati, Josiah Sam Owusu-Danquah et al. • Transportation Research Record Journal of the Transportation Research Board
(2026)
This study sought to advance a future-ready transportation engineering (TE) workforce by investigating emerging industry-wide challenges, essential skills, and opportunities for interdisciplinary collaboration. To accomplish this, a nationa...
OPENALEX
DOI: https://doi.org/10.1177/03611981261437031
Hyeong-Seok Oh, Chan-Bae Park, Seung-Hwan Lee, Jae-Bum Lee et al. • AIP Advances
(2019)
In this paper, to complement the capability of the existing heating system using an electric-heating wire for melting snow and ice in railway turnouts, 250kHz-200W-class Induction Heating (IH) system was designed. The IH system consists of ...
DOAJ
Open Access (DOAJ)
DOI: 10.1063/1.5129857