Home »
Academic Articles & Research Papers
Showing 20 of 1,992 academic articles
Zhexin Li, Wenhao Ran, Yongxu Yan, Linlin Li et al. • InfoMat
(2022)
Abstract Noncontact interaction systems have attracted considerable research attention in recent years because of convenient operation, sterility, and injury prevention. However, the insufficient sensing distance and weak robustness of nonc...
DOAJ
Open Access (DOAJ)
DOI: 10.1002/inf2.12261
PENG Heng, DONG Minghui, ZHANG Maoqi, BAI Mingxian, GUO Jianwei • Cailiao Baohu
(2026)
Sealing is a core factor for the safe operation of high-pressure proton exchange membrane electrolysis cells(PEMECs).To investigate the corrosion behavior of sealing polymer materials,two experimental methods were established: an accelerate...
DOAJ
Open Access (DOAJ)
DOI: 10.16577/j.issn.1001-1560.2026.0015
Jiaquan Li, Kai Wang, Yijiao Jiang, Jun Huang et al. • Small Science
(2023)
Single‐atom catalysts (SACs) composed of atomically dispersed metal‐active sites embedded in supporting substrates are attracting increasing attention in liquid‐phase selective oxidation reactions with joint merits of both advanced catalyti...
DOAJ
Open Access (DOAJ)
DOI: 10.1002/smsc.202300079
Junchao Yang, Ziyang Peng • World Electric Vehicle Journal
(2025)
Countries worldwide are increasingly focused on addressing the imbalance between the supply and demand for EV charging infrastructure, with the community-shared charging post (CSCP) co-construction project emerging as a promising solution. ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/wevj16010054
Rajavel Dhandabani, Shantharajah S. Periyasamy, Padma Theagarajan, Arun Kumar Sangaiah • IET Networks
(2018)
This paper deals with the novel approach to generate cubical key that symbolises the message and key in six‐face cubical structure. The cubical message is hybridised to generate the cipher in the encryption. Hybridisation of cubes is perfor...
DOAJ
Open Access (DOAJ)
DOI: 10.1049/iet-net.2017.0196
G Carbajal-Franco, E Rendón-Lara, I M Abundez-Barrera, A Vásquez-Aguilar • Materials Research Express
(2020)
The finding of a material with the precise properties needed to solve a specific issue is the first topic that needs unraveling when an application is projected. One approach to find a material with a specific property value is to study a d...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2053-1591/ab7b2b
• Chemical & Engineering News
(1958)
A FULLY EQUIPPED ATOMIC LABORATORY with instructions and experiments make up Nuclear-Chicago's new "packaged" nuclear engineering program for coDeges. First reactor from its production line will be installed at Northwestern University, Evan...
OPENALEX
DOI: https://doi.org/10.1021/cen-v036n001.p108
related areas, ordered algebraic, category-theoretic structures, semantically methods (2021)
The conference brings together researchers working on mathematical foundations of quantum physics, quantum computing, and related areas, with a focus on structural perspectives and the use of logical tools, ordered algebraic and category-th...
OPENALEX
Oriane Baulin, Thierry Douillard, Damien Fabrègue, Michel Perez et al. • Materials & Design
(2019)
Recently, the high ductility of Cu-based bulk metallic glasses (BMGs) has been directly linked to the presence of Y2O3 precipitates, and surrounding crystallized areas. Nevertheless, the formation of the precipitates remains to be defined. ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.matdes.2019.107660
Mengda Li, Yutian Cheng, Tongjun Yu, Jiejun Wu et al. • Materials & Design
(2019)
Stress-induced self-separation is one of the most efficient process for preparing native GaN substrate. The control of GaN film thickness is the key point for GaN film separating from substrate completely. Considering the bowing of bilayer,...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.matdes.2019.107985
Jilong Zhao, Qing Wang, Qingfeng Han • IEEE Access
(2024)
In this paper, a novel axial flux reversal permanent magnet (PM) (AFRPM) machine, which combines the merit of the axial flux PM (AFPM) machine and flux reversal PM machine, is proposed. Meanwhile, according to the characteristics of the mac...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2024.3389699
Chunyu Ding, Yan Su, Shuguo Xing, Shun Dai et al. • International Journal of Antennas and Propagation
(2017)
In the process of lunar exploration, and specifically when studying lunar surface structure and thickness, the established lunar regolith model is usually a uniform and ideal structural model, which is not well-suited to describe the real s...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2017/3013249
Denis A Romanov • Materials Research Express
(2020)
This article describes increasing wear resistance of 5CrNiMo die steel by more than 5 times. This effect is achieved by creating TiC-Ti-Al and TiB _2 -Ti-Al coatings on the surface of 5CrNiMo die steel. The microhardness of the formed coati...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2053-1591/ab86f6
Xiaoqing Gu, Cong Zhang, Tongguang Ni • IEEE Access
(2019)
The rule-based fuzzy systems have successfully applied for numerous medical data classification problems. However, structuring the concise and interpretable fuzzy rules with good classification performance is still a big challenge. To addre...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2019.2954707
Junping Hu, Youxing Liu • Materials Research Express
(2021)
Exploiting non-noble metals catalysts with excellent performance for hydrogen evolution reaction (HER) has aroused gigantic interest, but still challenges. Herein, we reported the graphene oxide (GO) supported Fe doped Ni(OH) _2 hexagonal n...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2053-1591/abecad
Ivan Gundarovich Tananaev, G. A. Sarychev, Boris F. Myasoedov • Nanotechnologies in Russia
(2016)
Key results concerning large-scale application of nanomaterials in nuclear engineering are reviewed. The data on redox reactions of uranium and actinides in solutions and solid-phase transformations for the development of modern technologie...
OPENALEX
DOI: https://doi.org/10.1134/s1995078016010158
Mary Frances Lembo • CRC Press eBooks
(2011)
Human beings have engaged in some form of “materials engineering” since the beginning of life on Earth. We have even named eras after the materials that were predominantly used in those historic times (e.g., Stone Age, Bronze Age). However,...
OPENALEX
DOI: https://doi.org/10.1201/b11072-19
Ayyappan M, Muthiah A • Materials Research Express
(2026)
In this paper, melting and solidification characteristics of composite PCM filled inside the shell and tube heat exchanger were investigated experimentally. ZnO nanoparticles (NPs) were synthesized using the sol–gel method. Myristic acid (M...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2053-1591/ae44e7
Luís P. G. Monteiro, João Borges, João M. M. Rodrigues, João F. Mano • Marine Drugs
(2023)
Marine-origin polysaccharides, in particular cationic and anionic ones, have been widely explored as building blocks in fully natural or hybrid electrostatic-driven Layer-by-Layer (LbL) assemblies for bioapplications. However, the low chemi...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/md21020092
Viktória Hideg, Emese Makó • Chemical Engineering Transactions
(2023)
In recent years an increasing number of cities and transport planning documents (such as Sustainable Urban Mobility Plan) aim to reduce car traffic and promote active modes of transport – walking and cycling. The development of active modes...
DOAJ
Open Access (DOAJ)