Reset
Showing 20 of 416 academic articles

Comparative investigation of similar and dissimilar AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced by continuous-drive friction welding

Ibrahim Sabry, Abdel-Hamid Ismail Mourad, Mohamed ElWakil • Journal of Materials Research and Technology (2026)

This study considers continuous-drive friction welding to compare AA6061/AA6061, AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced under the same nominal processing conditions. Optical and scanning electron microscopy, EDS, XR...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2026.09.145

Use of Experimental Design to Evaluate the Effect of the Incorporation of Quartzite Residues in Ceramic Mass for Porcelain Tile Production

Karina Ruiz Silva, Liszandra Fernanda Araújo Campos, Lisiane Navarro de Lima Santana • Materials Research (2018)

The potential of using quartzite residues in the composition of an industrial ceramic mass for porcelain tile production was investigated through experimental design. Chemical, physical and microstructural analyses were accomplished to unde...

DOAJ Open Access (DOAJ) DOI: 10.1590/1980-5373-mr-2018-0388

A study of aerodynamic noise in air duct systems with turning vanes

Rašuo Boško, Dinulović Mirko, Trninić Marta, Stamenović Marina et al. • FME Transactions (2021)

Noise is becoming one of the problems in many industrial applications. In this paper the aerodynamic noise in air duct system that arises from air flow passing over a surface of turning vanes is investigated. Based on Proudman's formula usi...

DOAJ Open Access (DOAJ) DOI: 10.5937/fme2102308R

The Fantasy Method of Urban Design

Alan Marshall • Diseña (2018)

The Fantasy Method of Urban Design is an experimental cross-disciplinary method that aims to predict the future social and technological forces impacting upon our cities, and to design such cities in line with these predictions. Utilizing f...

DOAJ Open Access (DOAJ)

Application of Functional Nanomaterials in Aesthetic Art and Industrial Design Concept

Da Gong, Zhenghang Li, Yuyan Song, Jiaheng Han • Advances in Materials Science and Engineering (2022)

Industrial design (ID) refers to industrial product design based on engineering, aesthetics, and economy. Traditional industrial design refers to the creative activities of designing and designing products produced by industrial means to ma...

DOAJ Open Access (DOAJ) DOI: 10.1155/2022/9334608

Reentrant condensation of a multicomponent cola/milk system induced by polyphosphate

Tomohiro Furuki, Tomohiro Nobeyama, Shunji Suetaka, Ryokei Matsui et al. • Food Chemistry: X (2024)

Reentrant condensation (RC) is a protein behavior in which the protein solution shifts between the one- and two-phase state more than twice by increasing a single parameter. Although RC would be a candidate mechanism for the physicochemical...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.fochx.2024.101165

Influence of Non - Condensable Gases on the Processes of Heat and Mass Transfer during Film Condensation of Steam in Heat Exchangers

Reshetnikov I.F., Shikhalev S.V., Tikhonov S.L. • Problems of the Regional Energetics (2018)

The aim of the article is a quantitative assessment of the influence of non-condensable gases on the intensity of heat and mass transfer processes during film condensation of steam in the specific conditions for heat exchanger. The task is ...

DOAJ Open Access (DOAJ) DOI: 10.5281/zenodo.2222362

Evaluation of eco-efficient geopolymer using chamotte and waste glass-based alkaline solutions

Beatryz C. Mendes, Leonardo G. Pedroti, Carlos Maurício F. Vieira, José Maria F. Carvalho et al. • Case Studies in Construction Materials (2022)

Geopolymers are binder materials that can be an alternative to replace Portland cement. They are considered less aggressive to the environment because of the lower emission of CO2 and use of energy in their production chain. This work aimed...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.cscm.2021.e00847

Flat Plate based- Solar System with a tracking system

M. Abdunnabi, A. Abusalama, M. Algamil, M. Almontaser • Solar Energy and Sustainable Development (2018)

Water heating in Libyan domestic sector represents over 29% of the total electrical consumption. There is a great potential of hot water usage in the industrial and other sectors. Solar energy can play vital role in providing hot water to t...

DOAJ Open Access (DOAJ)

EXARIS Model Development: Enhancing Elementary Scientific and Digital Literacy

Exsaris Januar, Nurhizrah Gistituati, Yanti Fitria, Alwen Bentri et al. • Educational Process: International Journal (2025)

Background/purpose. Study addresses the problem of low scientific and digital literacy among Grade 6 students (Phase C) in the IPAS (Science and Social Studies) subject under the Merdeka Curriculum, particularly in the theme “Our Endangered...

DOAJ Open Access (DOAJ) DOI: 10.22521/edupij.2025.18.450

Thermodynamics and Kinetics in Materials Science

Boris S. Bokstein, Mikhail I. Mendelev, David J. Srolovitz • Oxford University Press eBooks (2005)

This text presents a concise and thorough introduction to the main concepts and practical applications of thermodynamics and kinetics in materials science. It is designed with two types of uses in mind: firstly for one or two semester unive...

OPENALEX DOI: https://doi.org/10.1093/oso/9780198528036.001.0001

Improved production of titanate nanotubes by hydrothermal method for adsorption of organic dyes

Ayman H. Zaki, Sara Adel, Mahmoud M. Abd El-hafiez, Ahmed A. Abdel-Khalek • Beni-Suef University Journal of Basic and Applied Sciences (2021)

Abstract Background Increasing the yield of nanomaterials using the same reactor size and fixing most of the reactants and conditions will greatly improve the production process by saving time, energy and efforts. Titanate nanotubes are mai...

DOAJ Open Access (DOAJ) DOI: 10.1186/s43088-021-00175-y

Minimum and Full Fluidization Velocity for Alumina Used in the Aluminum Smelter

Paulo Douglas S. de Vasconcelos, André L. Amarante Mesquita • International Journal of Engineering Business Management (2011)

Fluidization is an engineering unit operation that occurs when a fluid (liquid or gas) ascends through a bed of particles, and these particles get a velocity of minimum fluidization V mf enough to stay in suspension, but without carrying th...

DOAJ Open Access (DOAJ) DOI: 10.5772/50943

To the question of foreign-language training of undergraduates of power specialities in technical establishments of higher education of Ukraine

Nataliia Bilan • Ukrainian Journal of Educational Studies and Information Technology (2019)

In the article the current state of foreign linguistic preparation of future power-engineering specialists in technical institutions of higher education is investigated and analysed. On the basis of the theoretical review of scientific and ...

DOAJ Open Access (DOAJ) DOI: 10.32919/uesit.2019.01.01

Intelligent Sensing and Monitoring System for High-Voltage Transmission Line Status of Smart Grid Based on IoT Technology

Mingzhe Hao, Nianhua Kou, Chenglin Zeng • World Electric Vehicle Journal (2023)

This paper integrates the Internet of Things (IoT) technology and a smart grid to build an electric power IoT architecture and analyzes the intelligent sensing technology and wireless communication technology in this electric power IoT. Thr...

DOAJ Open Access (DOAJ) DOI: 10.3390/wevj14080224