Reset
Showing 20 of 553 academic articles

Performance Analysis of the SIFT Operator for Automatic Feature Extraction and Matching in Photogrammetric Applications

Francesco Nex, Davide Marenchino, Andrea Lingua • Sensors (2009)

In the photogrammetry field, interest in region detectors, which are widely used in Computer Vision, is quickly increasing due to the availability of new techniques. Images acquired by Mobile Mapping Technology, Oblique Photogrammetric Came...

DOAJ Open Access (DOAJ) DOI: 10.3390/s90503745

Assessing Wireless Sensing Potential With Large Intelligent Surfaces

Cristian J. Vaca-Rubio, Pablo Ramirez-Espinosa, Kimmo Kansanen, Zheng-Hua Tan et al. • IEEE Open Journal of the Communications Society (2021)

Sensing capability is one of the most highlighted new feature of future 6G wireless networks. This paper addresses the sensing potential of Large Intelligent Surfaces (LIS) in an exemplary Industry 4.0 scenario. Besides the attention receiv...

DOAJ Open Access (DOAJ) DOI: 10.1109/OJCOMS.2021.3073467

Vision-Based Autonomous Landing of a Quadrotor on the Perturbed Deck of an Unmanned Surface Vehicle

Riccardo Polvara, Sanjay Sharma, Jian Wan, Andrew Manning et al. • Drones (2018)

Autonomous landing on the deck of an unmanned surface vehicle (USV) is still a major challenge for unmanned aerial vehicles (UAVs). In this paper, a fiducial marker is located on the platform so as to facilitate the task since it is possibl...

DOAJ Open Access (DOAJ) DOI: 10.3390/drones2020015

Experimental study of a novel contact-based pose detection approach for digital twin-driven high-precision micro assembly

Nazeer Bilal, Pradeep Carol Santhosh, Vargas Patricia A., Erden Mustafa Suphi et al. • Manufacturing Review (2025)

This study presents a comprehensive study of a novel Contact-Based Pose Estimation Method (CBPEM) for enhancing precision in robotic assembly processes within digital twin frameworks. Conventional pose detection methods, such as laser and c...

DOAJ Open Access (DOAJ) DOI: 10.1051/mfreview/2025004

Geometric invariance in computer vision

Joseph L. Mundy, Andrew Zisserman • The MIT Press eBooks (1992)

Part 1 Foundations: algebraic invariants - invariant theory and enumerative combinatorics of young tableaux, Shreeram S. Abhyankar, geometric interpretation of joint conic invariants, Joseph L. Mundy, et al, an experimental evaluation of pr...

OPENALEX

Automatic building detection and land use classification in urban areas using multispectral high-spatial resolution imagery and LiDAR data

Txomin Hermosilla • ELCVIA Electronic Letters on Computer Vision and Image Analysis (2014)

Urban areas areimportant environments, accounting for approximately half the population of theworld. Cities attract residents partly because they offer ample opportunitiesfor development, which often results in urban sprawl and its complex ...

DOAJ Open Access (DOAJ) DOI: 10.5565/rev/elcvia.584

Generalized Vision-Based Detection, Identification and Pose Estimation of Lamps for BIM Integration

Francisco Troncoso-Pastoriza, Javier López-Gómez, Lara Febrero-Garrido • Sensors (2018)

This paper introduces a comprehensive approach based on computer vision for the automatic detection, identification and pose estimation of lamps in a building using the image and location data from low-cost sensors, allowing the incorporati...

DOAJ Open Access (DOAJ) DOI: 10.3390/s18072364

Unmanned Aerial Vehicle-Based Structural Health Monitoring and Computer Vision-Aided Procedure for Seismic Safety Measures of Linear Infrastructures

Luna Ngeljaratan, Elif Ecem Bas, Mohamed A. Moustafa • Sensors (2024)

Computer vision in the structural health monitoring (SHM) field has become popular, especially for processing unmanned aerial vehicle (UAV) data, but still has limitations both in experimental testing and in practical applications. Prior wo...

DOAJ Open Access (DOAJ) DOI: 10.3390/s24051450

DualSight: multi-stage instance segmentation framework for improved precision

Stephen Price, Kiran Judd, Kyle Tsaknopoulos, Rodica Neamtu et al. • Scientific Reports (2025)

Abstract Powder properties, particularly their morphology (which includes size, shape, surface roughness, etc.), play a critical role in the quality of cold spray additively manufactured materials. A change in feedstock powder morphology ca...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-025-09642-3

AnimalTA: A highly flexible and easy‐to‐use program for tracking and analysing animal movement in different environments

Violette Chiara, Sin‐Yeon Kim • Methods in Ecology and Evolution (2023)

Abstract Computer programs for video tracking of animal movement are evolving increasingly efficient, using complex algorithms or artificial intelligence systems. Despite the consequent progress in this field, researchers still face some fu...

DOAJ Open Access (DOAJ) DOI: 10.1111/2041-210X.14115

Tracking and Analysis of the Movement Behavior of European Seabass (Dicentrarchus labrax) in Aquaculture Systems

Dimitra G. Georgopoulou, Orestis Stavrakidis-Zachou, Orestis Stavrakidis-Zachou, Nikos Mitrizakis et al. • Frontiers in Animal Science (2021)

Monitoring and understanding fish behavior is crucial for achieving precision in everyday husbandry practices (i.e. for optimizing farm performance), and for improving fish welfare in aquaculture. Various intelligent monitoring and control ...

DOAJ Open Access (DOAJ) DOI: 10.3389/fanim.2021.754520