Reset
Showing 20 of 3,571 academic articles

Breaking of Thermopower–Conductivity Trade‐Off in LaTiO3 Film around Mott Insulator to Metal Transition

Takayoshi Katase, Xinyi He, Terumasa Tadano, Jan M. Tomczak et al. • Advanced Science (2021)

Abstract Introducing artificial strain in epitaxial thin films is an effective strategy to alter electronic structures of transition metal oxides (TMOs) and to induce novel phenomena and functionalities not realized in bulk crystals. This s...

DOAJ Open Access (DOAJ) DOI: 10.1002/advs.202102097

Improved object detection method for autonomous driving based on DETR

Huaqi Zhao, Songnan Zhang, Xiang Peng, Zhengguang Lu et al. • Frontiers in Neurorobotics (2025)

Object detection is a critical component in the development of autonomous driving technology and has demonstrated significant growth potential. To address the limitations of current techniques, this paper presents an improved object detecti...

DOAJ Open Access (DOAJ) DOI: 10.3389/fnbot.2024.1484276

Dynamic Assembly of Microgels and Polymers at Non‐Aqueous Liquid/Liquid Interfaces

Xin Guan, Yang Liu, Lianwei Li, Man‐Hin Kwok et al. • Advanced Science (2025)

Abstract Particle assembly at liquid–liquid interfaces presents a promising bottom‐up strategy for creating supramolecular materials with advanced functionalities. However, the significantly lower interfacial tension observed in immiscible ...

DOAJ Open Access (DOAJ) DOI: 10.1002/advs.202415642

Information-analytical aspects of the reception organisation of powder microcomposites on an iron basis

A.V. LYULKO, V.V. GRITSENKO, B.B. JMAILOV, V.G. LYULKO • Вестник Донского государственного технического университета (2018)

The basic stages of a complex development direction of a science and practice of powder metallurgy as method of information-analytical representation of its basic aspects are presented. The basic algorithm of carrying out of operations and ...

DOAJ Open Access (DOAJ)

Pressure Effects on Monolayer FeCl2: Above‐Room‐Temperature Ferromagnetism with In‐Plane Electric Polarization and Interface‐Free Magnetic Tunnel Junctions

Shubham Tyagi, Paresh C. Rout, Shubham Singh, Udo Schwingenschlögl • Advanced Electronic Materials (2026)

ABSTRACT We investigate the influence of hydrostatic pressure on the physical properties of monolayer FeCl2 for spintronics applications. A phase transition from a ferromagnetic half‐metal to a ferromagnetic semiconductor is unveiled at 4.6...

DOAJ Open Access (DOAJ) DOI: 10.1002/aelm.202500230

Lysosome blockade induces divergent metabolic programs in macrophages and tumours for cancer immunotherapy

Jing Ma, Ruijuan Ma, Xueke Zeng, Liming Zhang et al. • Journal of Experimental & Clinical Cancer Research (2023)

Abstract Background Platinum-drugs based chemotherapy in clinic increases the potency of tumor cells to produce M2 macrophages, thus leading to poor anti-metastatic activity and immunosuppression. Lysosome metabolism is critical for cancer ...

DOAJ Open Access (DOAJ) DOI: 10.1186/s13046-023-02768-0

The Evolution of COVID-19 Transmission with Superspreaders Class under Classical and Caputo Piecewise Operators: Real Data Perspective from India, France, and Italy

Shabir Ahmad, Salma Haque, Khalid Ali Khan, Nabil Mlaiki • Fractal and Fractional (2023)

In this study, we analyze the transmission of the COVID-19 model by using a piecewise operator in the classical Caputo sense. The existence along with the uniqueness of the solution of the COVID-19 model under a piecewise derivative is pres...

DOAJ Open Access (DOAJ) DOI: 10.3390/fractalfract7070501

Experimental study on unloading induced shear performances of 3D saw-tooth rock fractures

Qian Yin, Xinxin Nie, Jiangyu Wu, Qi Wang et al. • International Journal of Mining Science and Technology (2023)

A fractal model governing saw-tooth fractures was first introduced to replicate sandstone samples containing an inclined 3D penetrating rough fracture surface with various joint roughness coefficients (JRC). In conventional triaxial compres...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.ijmst.2023.02.002

Finite element analysis on the near field properties of metallic cavities with atomic sharpness

Qiyuan Dai, Liang Ma, Li Li, Guangjun Tian • Results in Physics (2023)

Using finite element calculations, we investigated the near field properties of two types of commonly used metal nanostructures (a tip-substrate model representing a scanning tunneling microscope type setup (TS) and a nanoparticle-on-mirror...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.rinp.2023.106360

The Coming of Materials Science

David A. Weitz • Physics Today (2002)

The Coming of Materials Science , Robert W. Cahn Pergamon, New York, 2001. $64.00 (568 pp.). isbn 0-08-042679-4 If one takes the broadest view, a significant fraction of modern-day physicists are materials scientists. Similarly, many chemis...

OPENALEX Open Access DOI: https://doi.org/10.1063/1.1496379

Materials Science and Engineering

Lashawn M. Gehrig, Xinyu Hu • Trans Tech Publications Ltd. eBooks (2023)

This edition presents the articles devoted mainly to materials processing technologies of steel and alloys, materials properties and advanced manufacturing technologies in the related fields of materials. All of them were selected from the ...

OPENALEX DOI: https://doi.org/10.4028/b-56k662

Materials Science of Synthetic Membranes

Douglas R. Lloyd • ACS symposium series (1985)

Material science aspects of synthetic polymeric membranes are presented in this survey. The objective is to place each of the subsequent chapters of this volume into proper perspective. Therefore, frequent reference is made to the accompany...

OPENALEX DOI: https://doi.org/10.1021/bk-1985-0269

Practical Handbook of Materials Science

Charles W. Lynch • CRC Press eBooks (1989)

CRC Practical Handbooks are a series of single-volume bench manuals that feature a synthesis of frequently used, basic reference information. These highly abridged versions of existing CRC multi-volume Handbooks contain largely tabular and ...

OPENALEX DOI: https://doi.org/10.1201/9781003041047

Principles of Materials Science and Engineering

William F. Smith • Journal of International Crisis and Risk Communication Research (1986)

This book attempts to provide basic knowledge about the structure, properties, and processing of engineering materials and their applications. The first chapter gives an introduction to materials science and engineering and briefly describe...

OPENALEX Open Access

Thermodynamics and Kinetics in Materials Science

Boris S. Bokstein, Mikhail I. Mendelev, David J. Srolovitz • Oxford University Press eBooks (2005)

This text presents a concise and thorough introduction to the main concepts and practical applications of thermodynamics and kinetics in materials science. It is designed with two types of uses in mind: firstly for one or two semester unive...

OPENALEX DOI: https://doi.org/10.1093/oso/9780198528036.001.0001

Materials for Total Hip Joint Prostheses: Biaxial Flexural Strength of Two Ceramic Systems

Bojana TABAKOVA, Ivanka KALIMANOVA, Ina YANKOVA, Hristiana NIKOLOVA • The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science (2010)

Total hip joint replacement is one of the most successful orthopaedic surgeries in the last decade. Essential part of total hip joint prostheses is the mobile joint “hemispherical head - hemispherical cup”. Functional properties and durabil...

DOAJ Open Access (DOAJ)