Reset
Showing 20 of 54 academic articles

TOURISM SUSTAINABILITY ANALYSIS AND THE PROSPECTS FOR CREATING AN ETHNOVISUAL TOURISM ATLAS IN ADJARA

Manuchar Loria, Gulad khilaishvili, Natalia Jijavadze • Three Seas Economic Journal (2023)

Ethnovisual tourism explores a destination's cultural heritage through visual means, generating economic benefits and encouraging investment in cultural infrastructure and heritage conservation projects. Assessing the social, economic and e...

DOAJ Open Access (DOAJ) DOI: 10.30525/2661-5150/2023-3-1

Masterbatch-enabled acceleration of polyolefin biodegradation under open air terrestrial environmental conditions

Ceren Kütahya, Catalina Cruañas Pániker, Faith Ly, Arjun Jerath et al. • npj Materials Degradation (2026)

Abstract Polyolefins, commonly used in packaging and single-use products, are notoriously persistent in the environment, contributing significantly to environmental pollution. In scientific literature to date, polyolefins have not been repo...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41529-026-00817-5

Sustainable re-use of waste glass, cement and lime treated dredged material as pavement material

Gamze Bilgen, Omer Faruk Altuntas • Case Studies in Construction Materials (2023)

The amount of waste materials such as dredged materials (DM) and waste glass (WG) have been growing exponentially since the middle of the 20th century. The most important problem created by them is the lack of space to be used for storage b...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.cscm.2022.e01815

Advancements in Ni‐based Catalysts for Direct Urea Fuel Cells: A Comprehensive Review

Yulia M. T. A. Putri, Muhammad I. Syauqi, Isnaini Rahmawati, Aliyah Aliyah et al. • ChemElectroChem (2024)

Abstract The growing demand for sustainable energy sources has spurred significant studies to optimize the potency of fuel cell technology. Direct urea fuel cell (DUFC) has gained attention due to their energy density, eco‐friendliness, and...

DOAJ Open Access (DOAJ) DOI: 10.1002/celc.202300637

Exploring fibre addition methods and mechanical properties of fibre-reinforced 3D printed concrete: A review

Syed Bustan Fatima Warsi, Biranchi Panda, Pankaj Biswas • Developments in the Built Environment (2023)

3D Concrete Printing (3DCP) is a growing field of sustainable technology that offers an avenue for rapid industrialisation of the construction industry. Over the years, many non-structural elements have been fabricated by 3D printing, thus ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.dibe.2023.100295

Challenges of the growing African cement market – environmental issues, regulative framework, and quality infrastructure requirements

Schmidt Wolfram, Ngassam Inès L. Tchetgnia, Breitschaft Gerhard, Virchow Stephen • MATEC Web of Conferences (2018)

The African cement, concrete and construction business is growing at rapid pace. The cement sales are expected to grow rapidly until 2050. The number of newly built cement plants increases dramatically and in addition more cements are being...

DOAJ Open Access (DOAJ) DOI: 10.1051/matecconf/201714901014

Sustainable Use of By-Products and Wastes from Greece to Produce Innovative Eco-Friendly Pervious Concrete

Petros Petrounias, Panagiota P. Giannakopoulou, Aikaterini Rogkala, Maria Kalpogiannaki et al. • Applied Sciences (2022)

This study was based on the reduction of the extraction of natural resources and, at the same time, was focused on the use of by-products and various wastes in construction applications by following the principles of circular economy. Steri...

DOAJ Open Access (DOAJ) DOI: 10.3390/app12125861

Negative emissions technologies and practices could challenge global resource supply and environmental limits

Selene Cobo, Ángel Galán-Martín, Gonzalo Guillén-Gosálbez • Communications Earth & Environment (2026)

Abstract Meeting climate goals will most likely require large-scale carbon dioxide removal, yet its sustainability implications remain poorly understood. Here, we conduct a prospective life cycle assessment of multiple negative emissions te...

DOAJ Open Access (DOAJ) DOI: 10.1038/s43247-026-03348-8

Surface Modified Activated Carbons: Sustainable Bio-Based Materials for Environmental Remediation

Manoj Kumar Jha, Sahira Joshi, Ram Kumar Sharma, Allison A Kim et al. • Nanomaterials (2021)

Global warming and water/air contamination caused by human activities are major challenges in environmental pollution and climate change. The improper discharge of a large amount of agro-forest byproduct is accelerating these issues mainly ...

DOAJ Open Access (DOAJ) DOI: 10.3390/nano11113140

Bioentrepreneurship in Medical Biotechnology

Neeti Sharma • Advances in business strategy and competitive advantage book series (2021)

Being a developing sector, biotechnology combines both medical science and various facets of a sustainable environment. Scientific innovations from academics and industry contribute towards the rise of bioentrepreneurship across the world. ...

OPENALEX DOI: https://doi.org/10.4018/978-1-7998-7411-9.ch012

Israel, Iran, and Peace in the Middle East: An Analysis of Identity Formation, Enemy Construction, and the Logic of Expansionism

Bobby Rafipoor • Strategic Research on Social Problems (2026)

Introduction This article offers a comprehensive analysis of the evolving antagonism between Israel and Iran, integrating political-sociological, historical, and geopolitical perspectives. While the immediate catalyst for this inquiry is Is...

DOAJ Open Access (DOAJ) DOI: 10.22108/srspi.2025.146689.2154

A study on the flexural behaviour of lightweight concrete beams reinforced with pumice, silica fume and carbon fibers

Guledagudd Chaitali B., Praveen Kannam, Kulkarni Vinayak N. • Journal of the Mechanical Behavior of Materials (2026)

Lightweight aggregate concrete (LWAC) incorporating pumice aggregates offers a sustainable alternative to conventional concrete, enabling a reduced self-weight while maintaining adequate strength and stiffness for structural applications. T...

DOAJ Open Access (DOAJ) DOI: 10.1515/jmbm-2025-0113

Development of Power-to-X Catalytic Processes for CO<sub>2</sub> Valorisation: From the Molecular Level to the Reactor Architecture

Luis F. Bobadilla, Lola Azancot, Ligia A. Luque-Álvarez, Guillermo Torres-Sempere et al. • Chemistry (2022)

Nowadays, global climate change is likely the most compelling problem mankind is facing. In this scenario, decarbonisation of the chemical industry is one of the global challenges that the scientific community needs to address in the immedi...

DOAJ Open Access (DOAJ) DOI: 10.3390/chemistry4040083

Identify the causal pattern of sustainability principles Environment Based on Leed Regulations with Emphasis on Traditional Iranian Architecture (Case Study: Qom City)

Hassan Haji Amiri, Arash Seghfi Asl, Mehdi Ashjaie • تحقیقات کاربردی علوم جغرافیایی (2024)

The question of resource constraints is an issue for all industrialized, developed and developing countries. Therefore, saving on fossil energy consumption and sustainable development have become very important and common issues internation...

DOAJ Open Access (DOAJ)

A review of photovoltaic/thermal (PV/T) incorporation in the hydrogen production process

Hussein A. Kazem, Miqdam T. Chaichan, Ali H.A. Al-Waeli, K. Sopian et al. • Global Energy Interconnection (2025)

Integrating the photovoltaic/thermal (PV/T) system in green hydrogen production is an improvement in sustainable energy technologies. In PV/T systems, solar energy is converted into electricity and thermal energy simultaneously using hot wa...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.gloei.2025.03.001

Manufacturing of a New Generations from the Recycled AL Scrape Reinforced with AL2O3 - GNS Composite Powder by Vortex Technique for Automotive Spare Parts

Fathei Nouh, Omayma El kady, Sabry abdel aziz • International Journal of Industry and Sustainable Development (2024)

This research addresses the urgent challenges facing the materials and metallurgical industries, driving manufacturers to seek innovative solutions for material recycling. Aluminum scrape in used to manufacture a composite material with a h...

DOAJ Open Access (DOAJ) DOI: 10.21608/ijisd.2024.302067.1074

Effect of Closed Cycle Economy for Sustainable Development of Russian Regions: Reserves and Prospects of Import Substitution

E. U. Ganshina, I. L. Smirnova, S. P. Ivanova • Вестник Российского экономического университета имени Г. В. Плеханова (2025)

The article studies the concept of circular economy as an alternative of traditional linear model oriented to efficient use of natural resources, cutting wastes and development of closed material cycles. The basis of circular economy is for...

DOAJ Open Access (DOAJ) DOI: 10.21686/2413-2829-2025-4-36-45

Color‐Filter‐Free Image Sensor Using CsPbBr3 Quantum‐Dot‐Based Tamm Plasmon Photodetector for Photonic Synapse Facial Recognition

Meng‐Cheng Yen, Yung‐Chi Yao, Chia‐Jung Lee, Shi‐Hui Huang et al. • Advanced Science (2025)

Abstract This study demonstrates that optical absorption of the CsPbBr3 quantum dots can be significantly enhanced through monolithic integration with the Tamm plasmon (TP) structure. This integration enables the resulting TP photodetector ...

DOAJ Open Access (DOAJ) DOI: 10.1002/advs.202503464