Reset
Showing 20 of 50 academic articles

Fumaric acid regulates morphine tolerance in bone cancer pain through spinal MrgC receptor modulation

Sijie Liu, Minghao Tang, Jing Zhao, Lulu Zhang et al. • Pakistan Journal of Pharmaceutical Sciences (2026)

Background: Bone cancer pain (BCP) represents a debilitating complication that profoundly impacts patient quality of life and predisposes to psychological comorbidities, including depression and anxiety. Objectives: To investigate the effec...

DOAJ Open Access (DOAJ) DOI: 10.36721/PJPS.2026.39.8.233.1

Injectable mesoporous bioactive glass/sodium alginate hydrogel loaded with melatonin for intervertebral disc regeneration

Ruibang Wu, Leizhen Huang, Qinghong Xia, Zheng Liu et al. • Materials Today Bio (2023)

Intervertebral disc degeneration (IDD) is a major contributing factor to both lower back and neck pain. As IDD progresses, the intervertebral disc (IVD) loses its ability to maintain its disc height when subjected to axial loading. This fai...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.mtbio.2023.100731

Neutrons and Nuclear Engineering

Allen E Ekkebus • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (2007)

Oak Ridge National Laboratory hosted two workshops in April 2007 relevant to nuclear engineering education. In the Neutron Stress, Texture, and Phase Transformation for Industry workshop [http://neutrons.ornl.gov/workshops/nst2/], several i...

OPENALEX

Experimental investigation on phase change behavior of nanocomposite phase change material filled inside the shell and tube heat exchanger

Ayyappan M, Muthiah A • Materials Research Express (2026)

In this paper, melting and solidification characteristics of composite PCM filled inside the shell and tube heat exchanger were investigated experimentally. ZnO nanoparticles (NPs) were synthesized using the sol–gel method. Myristic acid (M...

DOAJ Open Access (DOAJ) DOI: 10.1088/2053-1591/ae44e7

Evaluation of experimentally observed asymmetric distributions of hardness, strain and residual stress in cold drawn bars by FEM-simulation

Juliana Zottis, Carla Adriana Theis Soares Diehl, Alexandre da Silva Rocha • Journal of Materials Research and Technology (2018)

The purpose of this paper is to investigate the correlation of strain and hardness parameters in a drawing process chain of an SAE 1045 steel bar. The present work discusses the application of the experimental and numerical method of analys...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2018.01.004

Sustainable Use of By-Products and Wastes from Greece to Produce Innovative Eco-Friendly Pervious Concrete

Petros Petrounias, Panagiota P. Giannakopoulou, Aikaterini Rogkala, Maria Kalpogiannaki et al. • Applied Sciences (2022)

This study was based on the reduction of the extraction of natural resources and, at the same time, was focused on the use of by-products and various wastes in construction applications by following the principles of circular economy. Steri...

DOAJ Open Access (DOAJ) DOI: 10.3390/app12125861

Stress-dilatancy properties for fiber-reinforced sand

KONG Yu-xia , SHENG Fei-fan , WANG Hui-juan • Yantu gongcheng xuebao (2018)

It is observed that randomly distributed polypropylene fibers act to interlock particles and thus improve the mechanical behavior of the reinforced soils. The polypropylene fiber inclusion clearly increases the shear strength of soils, and ...

DOAJ Open Access (DOAJ) DOI: 10.11779/CJGE201812012

An Integrated Approach for Designing and Analyzing Lumbar Vertebral Biomodels with Artificial Disc Replacement

Mhd Ayham Darwich, Katreen Ebrahem, Maysaa Shash, Hasan Mhd Nazha et al. • Applied Mechanics (2023)

This study aims to develop an integrated approach for 3D lumbar vertebral biomodel design and analysis, specifically targeting unilevel disc degeneration and the replacement of lumbar artificial discs. Key objectives include improving exist...

DOAJ Open Access (DOAJ) DOI: 10.3390/applmech4040063

A study on the flexural behaviour of lightweight concrete beams reinforced with pumice, silica fume and carbon fibers

Guledagudd Chaitali B., Praveen Kannam, Kulkarni Vinayak N. • Journal of the Mechanical Behavior of Materials (2026)

Lightweight aggregate concrete (LWAC) incorporating pumice aggregates offers a sustainable alternative to conventional concrete, enabling a reduced self-weight while maintaining adequate strength and stiffness for structural applications. T...

DOAJ Open Access (DOAJ) DOI: 10.1515/jmbm-2025-0113

Benchmarking spiking neurons for linear quadratic regulator control of multi-linked pole on a cart: from single neuron to ensemble

Shreyan Banerjee, Luna Gava, Aasifa Rounak, Vikram Pakrashi • Neuromorphic Computing and Engineering (2025)

The emerging field of neuromorphic computing for edge control applications poses the need to quantitatively estimate and limit the number of spiking neurons, to reduce network complexity and optimize the number of neurons per core and hence...

DOAJ Open Access (DOAJ) DOI: 10.1088/2634-4386/ae0fc0

4D printing of semi-crystalline crosslinked polymer networks with two-way shape-memory effect

Lorenzo Bonetti, Daniele Natali, Stefano Pandini, Massimo Messori et al. • Materials & Design (2024)

This paper introduces a novel approach to 4D printing tailored structures with reversible two-way shape-memory effect (SME) through material extrusion technology. To this aim, methacrylated poly(ε-caprolactone) (PCL) was synthesized and eva...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2024.112725

A Two-Dimensional Sequential Packing Method for Lunar Regolith Particles Based on Random Polygons

Chunguang Zhang, Feng Sun, Ye Li, Haining Zhao et al. • Aerospace (2026)

To accurately characterize the effects of polydisperse particle sizes, multimineral composition, and angular morphology on the packing structure of lunar regolith, a two-dimensional sequential packing method based on random convex octagons ...

DOAJ Open Access (DOAJ) DOI: 10.3390/aerospace13070612

Single molecule magnet’s (SMM) effects on antiferromagnet-based magnetic tunnel junction

Babu Ram Sankhi, Erwan Peigney, Hayden Brown, Pius Suh et al. • AIP Advances (2025)

Single-molecule magnets (SMMs) are pivotal in molecular spintronics, showing unique quantum behaviors that can advance spin-based technologies. By incorporating SMMs into magnetic tunnel junctions (MTJs), new possibilities emerge for low-po...

DOAJ Open Access (DOAJ) DOI: 10.1063/9.0000868

Verdi: a framework for implementing and formally verifying distributed systems

James R. Wilcox, Doug Woos, Pavel Panchekha, Zachary Tatlock et al. • ACM SIGPLAN Conference on Programming Language Design and Implementation (PLDI) (2015)

Distributed systems are difficult to implement correctly because they must handle both concurrency and failures: machines may crash at arbitrary points and networks may reorder, drop, or duplicate packets. Further, their behavior is often t...

OPENALEX Open Access DOI: https://doi.org/10.1145/2737924.2737958

Photoresponsive Biomimetic Soft Robots Enabled by Near‐Infrared‐Driven and Ultrarobust Sandwich‐Structured Nanocomposite Films

Yi Yu, Ran Peng, Zihe Chen, Li Yu et al. • Advanced Intelligent Systems (2021)

Soft robots, intelligent structures built up of smart soft materials, are capable of being programmed to perform delicate work. Recently, plenty of biomimetic soft robots with functionalities of grasping, sensing, searching, and transportin...

DOAJ Open Access (DOAJ) DOI: 10.1002/aisy.202100012