Reset
Showing 20 of 146 academic articles

Analysis of physical and morphological parameters of silk fibers in the aesthetic properties of silk fabrics

Tukhtaeva Zebo, Abulova Parvina • E3S Web of Conferences (2024)

This article outlines the issues of providing the medium-sized industrial sector with natural fiber products, analyzing the aesthetic properties of fabrics in the production of fabrics that meet the aesthetic and hygienic requirements of co...

DOAJ Open Access (DOAJ) DOI: 10.1051/e3sconf/202454808010

Industrial sewing as a creative resource in the clothing Surface Design project

Ana Cláudia de Abreu, Marizilda dos Santos Menezes • ModaPalavra e-periódico (2022)

The production of clothing has several operational steps, such as industrial sewing, which is used on textile surfaces as a materialization resource, that is, the union of two or more layers of fabrics by sewing points that makes the object...

DOAJ Open Access (DOAJ) DOI: 10.5965/1982615x15352022249

One-step fabrication of superhydrophobic fabrics with stable mechanical performance in harsh conditions

Zhuoxing Liu, Kexin Zhao, Jie Ma, Shijie Liu et al. • Nature Communications (2026)

Abstract Developing robust water-repellent textiles is critical for outdoor, protective, and industrial applications. However, achieving long-lasting water repellency under mechanical stress remains a significant challenge. Conventional app...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41467-026-70857-7

Dynamic Assembly of Microgels and Polymers at Non‐Aqueous Liquid/Liquid Interfaces

Xin Guan, Yang Liu, Lianwei Li, Man‐Hin Kwok et al. • Advanced Science (2025)

Abstract Particle assembly at liquid–liquid interfaces presents a promising bottom‐up strategy for creating supramolecular materials with advanced functionalities. However, the significantly lower interfacial tension observed in immiscible ...

DOAJ Open Access (DOAJ) DOI: 10.1002/advs.202415642

Microstructure and corrosion behavior of SLM–Ti6Al4V with different fabrication angles in F−-containing solutions

Yao WANG, Xiao-ying YAN, Cheng MAN, Hong-wei ZHANG et al. • 工程科学学报 (2021)

Selective laser fusion (SLM) is an emerging 3D printing technology that can greatly shorten the processing cycle and reduce the production cost of medical implants, thus offering broad prospects for application in the biomedical field. In a...

DOAJ Open Access (DOAJ) DOI: 10.13374/j.issn2095-9389.2020.09.29.001

Electrospun Polyamide6 Chitosan Nanofibers Reinforced with Zinc Oxide Nanoparticles and Functionalized MultiWalled Carbon Nanotubes: Some Physical, Mechanical Properties and Bacterial Rejection

Asmaa Alkhfaji • Muthanna Journal of Pure Science (2023)

With the fast development of nanotechnology, the preparation of electrospun nanofibers received increasing interest. Because of their large specific area and superior functional abilities, electrospun nanofiber membranes play an essential r...

DOAJ Open Access (DOAJ) DOI: 10.52113/2/10.02.2023/62-70

Recent advances in the Biosynthesis of Zirconium Oxide Nanoparticles and their Biological Applications

Salam S Alsharari, Muneefah A. Alenezi, Mona S. Al Tami, Mohammed Soliman • مجلة بغداد للعلوم (2023)

A critical milestone in nano-biotechnology is establishing reliable and ecological friendly methods for fabricating metal oxide NPs. Because of their great biodegradable, electrical, mechanical, and optical qualities, zirconia NPs (ZrO2NPs)...

DOAJ Open Access (DOAJ) DOI: 10.21123/bsj.2022.7055

Nanotechnology in dentistry

R. Vijayalakshmi, S. Ashok Kumar • Indian Journal of Dental Research (2006)

Nanotechnology is manipulating matter at nanometer level and the application of the same to medicine is called nanomedicine. Nanotechnology holds promise for advanced diagnostics, targeted drug delivery, and biosensors. In the long-term, me...

OPENALEX Open Access DOI: https://doi.org/10.4103/0970-9290.29890

Encyclopedia of Nanotechnology

Joel Cummings • Reference Reviews (2013)

Society that has become one of the twentieth-century classic science lectures, titled "There's Plenty of Room at the Bottom."He presented a technological vision of extreme miniaturization in 1959, several years before the word "chip" became...

OPENALEX DOI: https://doi.org/10.1108/09504121311320189

Palaeoenvironments and hominin evolutionary dynamics in southeast Asia

Anne-Marie Bacon, Nicolas Bourgon, Elise Dufour, Fabrice Demeter et al. • Scientific Reports (2023)

Abstract Secure environmental contexts are crucial for hominin interpretation and comparison. The discovery of a Denisovan individual and associated fauna at Tam Ngu Hao 2 (Cobra) Cave, Laos, dating back to 164–131 ka, allows for environmen...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-023-43011-2

MEMS-Reconfigurable Metamaterials and Antenna Applications

Tomislav Debogovic, Julien Perruisseau-Carrier • International Journal of Antennas and Propagation (2014)

This paper reviews some of our contributions to reconfigurable metamaterials, where dynamic control is enabled by microelectromechanical systems (MEMS) technology. First, we show reconfigurable composite right-/left-handed transmission line...

DOAJ Open Access (DOAJ) DOI: 10.1155/2014/138138

Design of a Circularly Polarized Galileo E6-Band Textile Antenna by Dedicated Multiobjective Constrained Pareto Optimization

Arnaut Dierck, Frederick Declercq, Thomas Vervust, Hendrik Rogier • International Journal of Antennas and Propagation (2015)

Designing textile antennas for real-life applications requires a design strategy that is able to produce antennas that are optimized over a wide bandwidth for often conflicting characteristics, such as impedance matching, axial ratio, effic...

DOAJ Open Access (DOAJ) DOI: 10.1155/2015/895963

Geophysics Under Stress

Colin M. Sayers • Society of Exploration Geophysicists and European Association of Geoscientists and Engineers eBooks (2010)

This is a recording of the 2010 Distinguished Instructor Short Course (DISC) by Colin Sayers. The state of stress within the earth has a profound effect on the propagation of seismic and borehole acoustic waves, this leads to many important...

OPENALEX DOI: https://doi.org/10.1190/1.9781560802129

Behavior study of the steel plate girder with a cellular honeycomb web

Haider K. AMMASH, Noora N. SHAFFAF • Przegląd Naukowy Inżynieria i Kształtowanie Środowiska (2023)

Based on the experimental test results of the authors, this investigation is concerned with the finite element analysis to examine and compare the load values and failure modes of the authors’ results. This research was conducted using the ...

DOAJ Open Access (DOAJ) DOI: 10.22630/srees.4743

The Application of Electrospun Titania Nanofibers in Dye-sensitized Solar Cells

Hana Krysova, Arnost Zukal, Jana Trckova-Barakova, Aravind Kumar Chandiran et al. • CHIMIA (2013)

Titania nanofibers were fabricated using the industrial NanospiderTM technology. The preparative protocol was optimized by screening various precursor materials to get pure anatase nanofibers. Composite films were prepared by mixing a comme...

DOAJ Open Access (DOAJ) DOI: 10.2533/chimia.2013.149

Green synthesis, characterization and functional validation of bio-transformed selenium nanoparticles

S. Vasanthakumar, M. Manikandan, Muthu Arumugam • Biochemistry and Biophysics Reports (2024)

Selenium, an essential micronutrient with potent anticancer and antioxidant properties, the inorganic form of selenium is highly toxic, while organic and elemental nanoforms are more bioavailable and less toxic and have gained attention owi...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.bbrep.2024.101760

3D Printing parameter optimisation combined with heat treatment for achieving high density and enhanced performance in refractory high-entropy alloys

Deyu Jiang, Miao Luo, Changxi Liu, Yashuo Zhang et al. • Virtual and Physical Prototyping (2025)

In this study, a Ti1.5Nb1Ta0.5Zr1Mo0.5 (TNTZM) high-entropy alloy was fabricated using laser powder bed fusion (LPBF). By integrating 63 sets of parameter trials with machine learning (ML) models, an optimised process window was identified,...

DOAJ Open Access (DOAJ) DOI: 10.1080/17452759.2025.2524524

Flexural Behaviour of Corroded RC Beams Strengthened with CFRCM: Refined Modelling, Parametric Analysis, and Design Assessment

Chaoqun Zeng, Jing-Pu Tang, Liangliang Wei, Miaochang Zhu et al. • Buildings (2026)

Reinforced concrete (RC) beams strengthened with carbon-fabric-reinforced cementitious matrix (CFRCM) systems have shown potential for restoring flexural performance, yet their effectiveness under different corrosion levels remains insuffic...

DOAJ Open Access (DOAJ) DOI: 10.3390/buildings16020377