Home »
Academic Articles & Research Papers
Showing 20 of 56 academic articles
Ayenew Amare, Mezigebu Belay, Zewudu Wondimagegn • Journal of Materials Science: Materials in Engineering
(2026)
Abstract The use of aluminium matrix composites (AMCs) in advanced engineering applications has increased due to their improved mechanical properties, such as hardness, ultimate tensile strength, toughness, wear, and corrosion resistance. A...
DOAJ
Open Access (DOAJ)
DOI: 10.1186/s40712-026-00421-0
Li Xu, Peng Ran, Wenqian Zhou, Jingshu Wang et al. • Nature Communications
(2026)
Abstract Conventional X‑ray sensing fails in extreme temperatures due to a fundamental trilemma: no material offers strong absorption, flexibility, and thermal stability simultaneously. Rigid inorganic scintillators exhibit thermal quenchin...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41467-026-71103-w
Jagadeesh Babu Veluru, Satheesh K. K., Trivedi D.C., Murthy V. Ramakrishna, Ph.D et al. • Journal of Engineered Fibers and Fabrics
(2007)
Electrospinning is one of the simplest techniques for obtaining polymer nano fibers. Nanofibers have large surface area to volume ratio and hence have excellent application potential in sensors, filter design etc. Polyaniline (PANI) is the ...
DOAJ
Open Access (DOAJ)
Denis A Romanov • Materials Research Express
(2020)
This article describes increasing wear resistance of 5CrNiMo die steel by more than 5 times. This effect is achieved by creating TiC-Ti-Al and TiB _2 -Ti-Al coatings on the surface of 5CrNiMo die steel. The microhardness of the formed coati...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2053-1591/ab86f6
Lijing Di, Hua Yang, Tao Xian, Xiujuan Chen • Materials Research
(2018)
In this work, the g-C3N4 nanoparticles decorated BiFeO3 microspheres composites (g-C3N4/BiFeO3) were successfully synthesized by hydrothermal treatment of g-C3N4 nanoparticles together with BiFeO3 microspheres. The SEM and HRTEM observation...
DOAJ
Open Access (DOAJ)
DOI: 10.1590/1980-5373-mr-2018-0081
D. H. Fu, Y. H. Zhan, N. Yan, H. S. Xia • eXPRESS Polymer Letters
(2015)
Natural rubber containing graphene and carbon nanotubes (CNTs) composites were prepared by ultrasonicallyassisted latex mixing. Natural rubber filled by both graphene and CNTs show significant enhanced tensile strength, while graphene exhib...
DOAJ
Open Access (DOAJ)
DOI: 10.3144/expresspolymlett.2015.56
M.A. Bajaber, I.Y. Hakeem • Journal of Materials Research and Technology
(2021)
An advanced development in construction industry was achieved by applying ultra-high-performance concrete technology (UHPC). Intensive research efforts had been concentrated in construction to produced amazing levels of qualities with stren...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2020.12.051
Guoping Ding, Yixuan Zhang, Yong Zhu • Advanced Composites Letters
(2019)
The advantages of carbon fiber-reinforced plastic (CFRP) box girders include good bending resistance, lightweight and high strength. Therefore, they are widely used in aerospace, rail transit, and other fields. When the CFRP box girder is s...
DOAJ
Open Access (DOAJ)
DOI: 10.1177/2633366X19891171
Tanimu Kogi Ibrahim, Danjuma Saleh Yawas, Julius Thaddaeus, Bashar Danasabe et al. • Scientific Reports
(2024)
Abstract This study focuses on optimizing double stir casting process parameters to enhance the tensile strength of hybrid composites comprising aluminum alloy, brown pumice, and coal ash, intended for brake disc applications. Analytical te...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-024-67476-x
Islam Sayah, Ibtissem Chakroun, Claudio Gervasi, Davide Barreca et al. • Foods
(2025)
Bacterial nanocellulose (BNC) has gained considerable interest over the last decade due to its unique properties and versatile applications. However, the low yield and the high production cost significantly limit its industrial scalability....
DOAJ
Open Access (DOAJ)
DOI: 10.3390/foods14162853
Taohan Lin, Nataliya Rybnikova • Geomatics
(2023)
Night-time light (NTL) data have been widely used as a remote proxy for the economic performance of regions. The use of these data is more advantageous than the traditional census approach is due to its timeliness, low cost, and comparabili...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/geomatics3010008
Seyyed Khalil HosseiniHashemi, Ahad Rahimi, Nadir Ayrilmis • BioResources
(2024)
Polypropylene (PP) with black locust wood flour and maleic grafted polypropylene were used to prepare wood plastic composites (WPC) by injection molding. The effect of the addition of nano titanium oxide (nano TiO2) on the properties of the...
DOAJ
Open Access (DOAJ)
S. Mazerat, R. Pailler • Data in Brief
(2020)
Due to their high specific strength at elevated temperatures and resistance to oxidative environments, SiC-based fibers are of great interest for the reinforcement of ceramic matrix composites. They are however subjected to a slow crack gro...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.dib.2020.106166
M. Vinod, B. S. Nithyananda, Shrishail B. Sollapur, Satish Gajbhiv et al. • Scientific Reports
(2026)
Abstract This work examined the role of alkaline and epoxy-based surface chemical treatments on the mechanical and thermal properties of flax fiber reinforced Aluminum Alloy 6082 hybrid Fiber Metal Laminates (FMLs), integrated with machine ...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-026-58852-w
Shuhai Huang, Cheng Chang, Jiaqi Liu, Shouwei Tong et al. • Crystals
(2023)
A composite groove structure with high specific strength and light weight has great potential in industrial application, but few studies on this have been carried out due to the fact that it is difficult to fabricate by one of the existing ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/cryst13121644
Kiran Kumar Amireddy, P. V. R. Ravindra Reddy, C. Nagendranatha Reddy, P. Prabhakar Reddy • Frontiers in Sensors
(2026)
This review critically discusses the development of continuous monitoring biosensors and the technological developments that have facilitated the transition from one-off or periodic measurement sensors to longer-term, connected and autonomo...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fsens.2026.1968999
Mehmet Yıldız, Hamit Hakan Alp, Pınar Gül, Nuri Bakan et al. • Journal of Dental Sciences
(2017)
Background/purpose: The two direct dental restorative materials most commonly used today are silver-mercury amalgam and resin-based composites. The purpose of this study was to examine the effects of these two restorative materials and subs...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jds.2017.02.002
William D. Callister (1985)
List of Symbols.Introduction.Atomic Structure and Interatomic Bonding.The Structure of Crystalline Solids.Imperfections in Solids.Diffusion.Mechanical Properties of Metals.Dislocations and Strengthening Mechanisms.Failure.Phase Diagrams.Pha...
OPENALEX
Noor Ul Hassan, Bahadir Tunaboylu, Ali Murat Soydan • Designs
(2019)
The bipolar plate is one of the most significant components of a polymer electrolyte membrane (PEM) fuel cell, and contributes substantially to the cost structure and the weight of the stacks. A number of graphite polymer composites with di...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/designs3010013
Elsaeed AS, Harp YS, Hamama H, Mahmoud SH • BMC oral health
(2026)
PMC
PMC Public Access (View-Only)
DOI: 10.1186/s12903-026-10102-1
PMC: PMC13737557