Reset
Showing 20 of 707 academic articles

Formulation, characterization, and valorization of the antioxidant, antibiofilm, and anti-adhesion potentials of a clove essential oil nanoemulsion

Enis Ben Bnina, Jihen Missaoui, Mohamed Firas Gannouni, Lotfi Achour et al. • OpenNano (2026)

Food safety and control are fundamental public health issues that maintain consumer confidence and protection. This design (management) requires monitoring production, processing, and conservation processes while limiting microbiological, c...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.onano.2026.100286

Anti-Amnesic Effects of Epigallocatechin Gallate on Scopolamine-Induced Learning and Memory Dysfunction in Sprague-Dawley Rats

Min-Jeong Kim, Eun-Sang Hwang, Kwan Joong Kim, Sungho Maeng et al. • Antioxidants (2021)

Epigallocatechin gallate (EGCG) is a major flavan-3-ol of green tea polyphenols that exhibits various beneficial health effects, including antioxidant, anti-bacterial, and anti-inflammatory properties. This study aimed to evaluate whether E...

DOAJ Open Access (DOAJ) DOI: 10.3390/antiox11010001

Effects of electron beam welding on the microstructure and impact properties of three reconstituted steels

HU Minglei, HU Bin, ZHANG Wei, LIU Xiaoou et al. • Fenmo yejin jishu (2025)

Specimen reconstitution technology is important for the in-service safety of reactor pressure vessels (RPVs) in nuclear power plants. To verify the feasibility of electron beam welding for the restructured specimens, the electron beam weldi...

DOAJ Open Access (DOAJ) DOI: 10.19591/j.cnki.cn11-1974/tf.2024070004

Investigation of the Structural, Electrical, and Optical Properties of the Nano-Scale GZO Thin Films on Glass and Flexible Polyimide Substrates

Fang-Hsing Wang, Kun-Neng Chen, Chao-Ming Hsu, Min-Chu Liu et al. • Nanomaterials (2016)

In this study, Ga2O3-doped ZnO (GZO) thin films were deposited on glass and flexible polyimide (PI) substrates at room temperature (300 K), 373 K, and 473 K by the radio frequency (RF) magnetron sputtering method. After finding the depositi...

DOAJ Open Access (DOAJ) DOI: 10.3390/nano6050088

The electrochemical effects of pitch stabilization for supercapacitor-grade activated carbon precursors

Jeong Han Lee, Min Ju O, Yong-Mook Kang, Kwang Chul Roh • Electrochemistry Communications (2024)

Petroleum pitch (PP) is a by-product generated during the petroleum refining process, characterized by its high carbon content, tunable structure, and cost-effectiveness. These attributes have spurred extensive research into its potential a...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.elecom.2023.107638

Thermoelectric properties of high pressure synthesized lithium and calcium double-filled CoSb3

Xiaohui Li, Yulong Kang, Chen Chen, Jianghua Li et al. • AIP Advances (2017)

Lithium and calcium are inefficient filling elements of CoSb3 at ambient pressure, but show nice filling behavior under high pressure. In this work, we synthesized Li/Ca double-filled CoSb3 with high pressure synthesis method. The products ...

DOAJ Open Access (DOAJ) DOI: 10.1063/1.4974501

Recent advances of two-dimensional materials in smart drug delivery nano-systems

Hua Zhang, Taojian Fan, Wen Chen, Yingchun Li et al. • Bioactive Materials (2020)

Smart drug delivery nano-systems show significant changes in their physical or chemical properties in response to slight change in environmental physical and/or chemical signals, and further releasing drugs adjusted to the progression of th...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.bioactmat.2020.06.012

Study of the growth mechanism of a self-assembled and ordered multi-dimensional heterojunction at atomic resolution

Zunyu Liu, Chaoyu Zhao, Shuangfeng Jia, Weiwei Meng et al. • Frontiers of Optoelectronics (2023)

Abstract Multi-dimensional heterojunction materials have attracted much attention due to their intriguing properties, such as high efficiency, wide band gap regulation, low dimensional limitation, versatility and scalability. To further imp...

DOAJ Open Access (DOAJ) DOI: 10.1007/s12200-023-00091-2

Properties of aniline or O-phenylenediamine/YBCO hybrid materials

LIN Shan, YUAN Hong-mei, WANG Dong, CHEN Shu-qing et al. • Cailiao gongcheng (2021)

YBa2Cu3O7-δ(YBCO) bulk material prepared by high temperature solid state reaction was milled and dispersed through ultrasonic process in ethanol to prepare nanoscale YBCO/ethanol sol. Then it was mixed with aniline or O-phenylenediamine and...

DOAJ Open Access (DOAJ) DOI: 10.11868/j.issn.1001-4381.2019.000902

Pressure Effects on Monolayer FeCl2: Above‐Room‐Temperature Ferromagnetism with In‐Plane Electric Polarization and Interface‐Free Magnetic Tunnel Junctions

Shubham Tyagi, Paresh C. Rout, Shubham Singh, Udo Schwingenschlögl • Advanced Electronic Materials (2026)

ABSTRACT We investigate the influence of hydrostatic pressure on the physical properties of monolayer FeCl2 for spintronics applications. A phase transition from a ferromagnetic half‐metal to a ferromagnetic semiconductor is unveiled at 4.6...

DOAJ Open Access (DOAJ) DOI: 10.1002/aelm.202500230

A review on green synthesis of ZnO nanoparticles

Madhusmita Swain, Durgamadhab Mishra, Gourishankar Sahoo • Discover Applied Sciences (2025)

Abstract Nanoparticles and Nanostructured materials are playing an ever-important role in affordable healthcare, environment remediation, renewable energy, agriculture, consumer electronics, cosmetics etc. However, progress in these sectors...

DOAJ Open Access (DOAJ) DOI: 10.1007/s42452-025-06957-8

Microstructure and corrosion resistance of Sm-containing Al-Mn-Si-Fe-Cu alloy

Han Yuyin, Ding Dongyan, Du Jiandi, Gao Yongjin • 上海师范大学学报. 自然科学版 (2017)

Optimizing alloy composition is an effective way to improve physical and chemical properties of automobile heat exchanger materials.A Sm-containing Al-Mn-Si-Fe-Cu alloy was investigated through transmission electron microscopy,scanning elec...

DOAJ Open Access (DOAJ) DOI: 10.3969/J.ISSN.1000-5137.2017.06.006

Finite element analysis on the near field properties of metallic cavities with atomic sharpness

Qiyuan Dai, Liang Ma, Li Li, Guangjun Tian • Results in Physics (2023)

Using finite element calculations, we investigated the near field properties of two types of commonly used metal nanostructures (a tip-substrate model representing a scanning tunneling microscope type setup (TS) and a nanoparticle-on-mirror...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.rinp.2023.106360

Functionalization of polyoxometalates: towards advanced applications in catalysis and materials science

Anna Proust, René Thouvenot, Pierre Gouzerh • Chemical Communications (2008)

Functionalization via covalent grafting of organic functions allows to tune the redox and acid-base properties, and the solubility of polyoxometalates, to enhance their stability and biological activity and to reduce their toxicity, to faci...

OPENALEX DOI: https://doi.org/10.1039/b715502f

Materials science of concrete

Jan P. Skalny, Sidney Mindess, Francis Young • American Ceramic Society eBooks (1989)

Prediction of a Portland Cement's Properties from its Chemical and Mineralogical Compositon. Tricalcium Silicate Hydration: A Historical Overview. Thermodynamics of Hydration Reactions. Tricalcium Silicate Hydration: A Historical Overview. ...

OPENALEX

Materials Science Foundations

• Materials science foundations (2016)

Foundations of Materials Science and Engineering (FoMSE) is the successor journal of the former Materials Science Foundations (monograph series) Materials Science Foundations (monograph series) is the periodical edition which consists of se...

OPENALEX DOI: https://doi.org/10.4028/www.scientific.net/msfo

The Coming of Materials Science

David A. Weitz • Physics Today (2002)

The Coming of Materials Science , Robert W. Cahn Pergamon, New York, 2001. $64.00 (568 pp.). isbn 0-08-042679-4 If one takes the broadest view, a significant fraction of modern-day physicists are materials scientists. Similarly, many chemis...

OPENALEX Open Access DOI: https://doi.org/10.1063/1.1496379

Materials science and engineering

CA (United States) Lawrence Livermore National Lab., D Lesuer, USDOE, Washington, DC (United States) (1997)

During FY-96, work within the Materials Science and Engineering Thrust Area was focused on material modeling. Our motivation for this work is to develop the capability to study the structural response of materials as well as material proces...

OPENALEX Open Access DOI: https://doi.org/10.2172/623044