Reset
Showing 20 of 3,033 academic articles

One-step fabrication of superhydrophobic fabrics with stable mechanical performance in harsh conditions

Zhuoxing Liu, Kexin Zhao, Jie Ma, Shijie Liu et al. • Nature Communications (2026)

Abstract Developing robust water-repellent textiles is critical for outdoor, protective, and industrial applications. However, achieving long-lasting water repellency under mechanical stress remains a significant challenge. Conventional app...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41467-026-70857-7

Improved object detection method for autonomous driving based on DETR

Huaqi Zhao, Songnan Zhang, Xiang Peng, Zhengguang Lu et al. • Frontiers in Neurorobotics (2025)

Object detection is a critical component in the development of autonomous driving technology and has demonstrated significant growth potential. To address the limitations of current techniques, this paper presents an improved object detecti...

DOAJ Open Access (DOAJ) DOI: 10.3389/fnbot.2024.1484276

The electrochemical effects of pitch stabilization for supercapacitor-grade activated carbon precursors

Jeong Han Lee, Min Ju O, Yong-Mook Kang, Kwang Chul Roh • Electrochemistry Communications (2024)

Petroleum pitch (PP) is a by-product generated during the petroleum refining process, characterized by its high carbon content, tunable structure, and cost-effectiveness. These attributes have spurred extensive research into its potential a...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.elecom.2023.107638

EXARIS Model Development: Enhancing Elementary Scientific and Digital Literacy

Exsaris Januar, Nurhizrah Gistituati, Yanti Fitria, Alwen Bentri et al. • Educational Process: International Journal (2025)

Background/purpose. Study addresses the problem of low scientific and digital literacy among Grade 6 students (Phase C) in the IPAS (Science and Social Studies) subject under the Merdeka Curriculum, particularly in the theme “Our Endangered...

DOAJ Open Access (DOAJ) DOI: 10.22521/edupij.2025.18.450

Effect of Prior Rolling on Microstructures and Property of Diffusion-Bonded Mg/Al Alloy

Yunlong Ding, Jialian Shi, Dongying Ju • Advances in Materials Science and Engineering (2019)

In this study, magnesium alloy AZ91, which was cast by double roll casting system, was rolled by a rolling mill. Then, rolled magnesium alloy and magnesium alloy without being rolled were, respectively, welded with aluminum alloy 6061 by di...

DOAJ Open Access (DOAJ) DOI: 10.1155/2019/4535984

Properties of aniline or O-phenylenediamine/YBCO hybrid materials

LIN Shan, YUAN Hong-mei, WANG Dong, CHEN Shu-qing et al. • Cailiao gongcheng (2021)

YBa2Cu3O7-δ(YBCO) bulk material prepared by high temperature solid state reaction was milled and dispersed through ultrasonic process in ethanol to prepare nanoscale YBCO/ethanol sol. Then it was mixed with aniline or O-phenylenediamine and...

DOAJ Open Access (DOAJ) DOI: 10.11868/j.issn.1001-4381.2019.000902

Microstructure and corrosion behavior of SLM–Ti6Al4V with different fabrication angles in F−-containing solutions

Yao WANG, Xiao-ying YAN, Cheng MAN, Hong-wei ZHANG et al. • 工程科学学报 (2021)

Selective laser fusion (SLM) is an emerging 3D printing technology that can greatly shorten the processing cycle and reduce the production cost of medical implants, thus offering broad prospects for application in the biomedical field. In a...

DOAJ Open Access (DOAJ) DOI: 10.13374/j.issn2095-9389.2020.09.29.001

A review on green synthesis of ZnO nanoparticles

Madhusmita Swain, Durgamadhab Mishra, Gourishankar Sahoo • Discover Applied Sciences (2025)

Abstract Nanoparticles and Nanostructured materials are playing an ever-important role in affordable healthcare, environment remediation, renewable energy, agriculture, consumer electronics, cosmetics etc. However, progress in these sectors...

DOAJ Open Access (DOAJ) DOI: 10.1007/s42452-025-06957-8

Experimental study on unloading induced shear performances of 3D saw-tooth rock fractures

Qian Yin, Xinxin Nie, Jiangyu Wu, Qi Wang et al. • International Journal of Mining Science and Technology (2023)

A fractal model governing saw-tooth fractures was first introduced to replicate sandstone samples containing an inclined 3D penetrating rough fracture surface with various joint roughness coefficients (JRC). In conventional triaxial compres...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.ijmst.2023.02.002

The Coming of Materials Science

David A. Weitz • Physics Today (2002)

The Coming of Materials Science , Robert W. Cahn Pergamon, New York, 2001. $64.00 (568 pp.). isbn 0-08-042679-4 If one takes the broadest view, a significant fraction of modern-day physicists are materials scientists. Similarly, many chemis...

OPENALEX Open Access DOI: https://doi.org/10.1063/1.1496379

Materials science and engineering

CA (United States) Lawrence Livermore National Lab., D Lesuer, USDOE, Washington, DC (United States) (1997)

During FY-96, work within the Materials Science and Engineering Thrust Area was focused on material modeling. Our motivation for this work is to develop the capability to study the structural response of materials as well as material proces...

OPENALEX Open Access DOI: https://doi.org/10.2172/623044

Materials Science and Engineering

Lashawn M. Gehrig, Xinyu Hu • Trans Tech Publications Ltd. eBooks (2023)

This edition presents the articles devoted mainly to materials processing technologies of steel and alloys, materials properties and advanced manufacturing technologies in the related fields of materials. All of them were selected from the ...

OPENALEX DOI: https://doi.org/10.4028/b-56k662

Materials Science of Synthetic Membranes

Douglas R. Lloyd • ACS symposium series (1985)

Material science aspects of synthetic polymeric membranes are presented in this survey. The objective is to place each of the subsequent chapters of this volume into proper perspective. Therefore, frequent reference is made to the accompany...

OPENALEX DOI: https://doi.org/10.1021/bk-1985-0269

Principles of Materials Science and Engineering

William F. Smith • Journal of International Crisis and Risk Communication Research (1986)

This book attempts to provide basic knowledge about the structure, properties, and processing of engineering materials and their applications. The first chapter gives an introduction to materials science and engineering and briefly describe...

OPENALEX Open Access

Big data and machine learning for materials science

Jose Fernando Rodrigues Junior, Larisa Florea, Maria Cristina Ferreira de Oliveira, Dermot Diamond et al. • Discover Materials (2021)

Herein, we review aspects of leading-edge research and innovation in materials science that exploit big data and machine learning (ML), two computer science concepts that combine to yield computational intelligence. ML can accelerate the so...

OPENALEX cc-by DOI: https://doi.org/10.1007/s43939-021-00012-0 PMC: 8054236

RETRACTED ARTICLE: A brief comparative examination of tangent hyperbolic hybrid nanofluid through a extending surface: numerical Keller–Box scheme

Wasim Jamshed, M. Prakash, S. Suriya Uma Devi, Rabha W. Ibrahim et al. • Scientific Reports (2021)

Abstract A novel hybrid nanofluid was explored in order to find an efficient heat-transmitting fluid to replace standard fluids and revolutionary nanofluids. By using tangent hyperbolic hybrid combination nanoliquid with non-Newtonian ethyl...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-021-03392-8

External Thermal Insulation Composite Systems: Critical Parameters for Surface Hygrothermal Behaviour

Eva Barreira, Vasco P. de Freitas • Advances in Materials Science and Engineering (2014)

External Thermal Insulation Composite Systems (ETICS) are often used in Europe. Despite its thermal advantages, low cost, and ease of application, this system has serious problems of biological growth causing the cladding defacement. Recent...

DOAJ Open Access (DOAJ) DOI: 10.1155/2014/650752

Simulation and experimental verification of the edge effect of composites on the infiltration process of RTM forming

ZHU Hongye, WANG Xiaoxu, LYU Jixiang, HAO Shulei • Xi'an Gongcheng Daxue xuebao (2025)

To study the influence of edge effects on the resin filling flow pattern in the RTM process of composite materials, the finite element software PAM-RTM was used to simulate and analyze the impregnation process of the blade preforms in RTM.B...

DOAJ Open Access (DOAJ) DOI: 10.13338/j.issn.1674-649x.2025.04.002