Home »
Academic Articles & Research Papers
Showing 20 of 7,962 academic articles
Parham Azimi, Naeim Azouji • International Journal of Industrial Engineering and Production Research
(2017)
In this paper a novel modelling and solving method has been developed to address the so-called resource constrained project scheduling problem (RCPSP) where project tasks have multiple modes and also the preemption of activities are allowed...
DOAJ
Open Access (DOAJ)
Christina Junger, Richard Fütterer, Maik Rosenberger, Gunther Notni • Measurement: Sensors
(2022)
In recent years, stereoscopic image processing algorithms have gained importance for a variety of applications. To capture larger measurement volumes, multiple stereo systems are combined into a multi-view stereo (MVS) system. To reduce the...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.measen.2022.100425
Yuanchen Cheng, Zichen Zhang, Yuqing Liu, Jie Li et al. • Ecological Informatics
(2025)
Accurate estimation of tuna catch is crucial for effective pelagic fishery management and resource conservation. However, existing manual counting methods suffer from issues such as low accuracy and poor timeliness, highlighting the urgent ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.ecoinf.2025.103116
Raziye Izanloo, Vahedberdi Sheikh • آب و فاضلاب
(2019)
In the past decades, urban development and the increase in densely populated urban areas have led to expansion of the impervious surfaces. This resulted in an increase in the volume and peak discharge of runoff. To face the intensified urba...
DOAJ
Open Access (DOAJ)
DOI: 10.22093/wwj.2017.81822.2381
Chaudry Sajed Saraj, Subhash C. Singh, Gopal Verma, Amged Alquliah et al. • Applied Surface Science Advances
(2023)
Transition–metal-doped electrocatalysts are considered as low-cost alternatives of Pt and RuO2 electrocatalysts for large scale electrochemical generations of hydrogen and oxygen, respectively. Although, chemical synthesis, typically adopte...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.apsadv.2022.100358
Panagiotis Stavropoulos, Vasiliki Christina Panagiotopoulou • Modelling
(2022)
Additive Manufacturing (AM), or else Smart Manufacturing, has been an intrinsic concept in Industry 4.0, offering flexibility and material efficiency. Certain limitations prevent AM from being used in the industrial setting extensively, des...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/modelling3010013
Islam Sayah, Ibtissem Chakroun, Claudio Gervasi, Davide Barreca et al. • Foods
(2025)
Bacterial nanocellulose (BNC) has gained considerable interest over the last decade due to its unique properties and versatile applications. However, the low yield and the high production cost significantly limit its industrial scalability....
DOAJ
Open Access (DOAJ)
DOI: 10.3390/foods14162853
Piotr Kolasiński • Energies
(2020)
Environmental issues are nowadays of great importance. In particular air and water quality should be kept at as high levels as possible. Energy conversion systems and devices which are applied for converting the chemical energy contained in...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/en13153983
Diego Ponce, Alexander Aguila Téllez, Narayanan Krishnan • Energies
(2023)
The growth in the demand for electrical energy, which is driven by the constant growth of the metropolises and the expansion of the productive capacities of the industrial sector, entails the inevitable development of the electrical system ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/en16207167
Tsonyo Slavov, Alexander Mitov, Jordan Kralev • Mathematics
(2025)
The article is devoted to designing novel multivariable robust μ-control of an open-circuit axial piston pump. In contrast with classical solutions of displacement volume control, in our case, the hydro-mechanical controller (by pressure, f...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/math13040643
Farida Farida, Nanang Supriadi, Siska Andriani, Dona Dinda Pratiwi et al. • RED. Revista de Educación a Distancia
(2022)
Metaphorical thinking is important in improving the formation and discovery of learning ideas in the 21st-century. However, the metaphorical thinking of Indonesian students is below the international average in terms of cognitive process, a...
DOAJ
Open Access (DOAJ)
DOI: 10.6018/red.493721
Kil-Mo Koo, Jin-Ho Song, Sang-Baik Kim, Kwang-Il Ahn et al. • Science and Technology of Nuclear Installations
(2012)
Unlike design basis accidents, some inherent uncertainties of the reliability of instrumentations are expected while subjected to harsh environments (e.g., high temperature and pressure, high humidity, and high radioactivity) occurring in s...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2012/656590
Meng Yuan, Lei Li, Zhezhuang Xu • IEEE Access
(2022)
In biaxial contouring control applications, the inherent structural flexibility of machines can lead to position discrepancies between the manipulator and actuator, and thus deteriorate the manufacturing performance, especially when the con...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2022.3157868
Yong-Chul Cho, Hyeonmi Choi, Soon-Ju Yu, Sang-Hun Kim et al. • Agronomy
(2021)
This study evaluated the spatiotemporal variability of water quality in the Han River Basin (HRB) as well as the contributions of potential pollution sources using multivariate statistical and absolute principal component score-multiple lin...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/agronomy11122469
Sharapov Rashid • MATEC Web of Conferences
(2018)
The article deals with the issue of the formation of the grain composition of the comminuted material inside the drum of a ball mill. The approach to the calculation of the grain composition at its transition from a larger fraction from a s...
DOAJ
Open Access (DOAJ)
DOI: 10.1051/matecconf/201825103010
Allahverdi Tagiyev, Elmir Karagozov, Mehriban Ismayilova, Lala Abdullayeva et al. • Energies
(2026)
The Lower Kura Basin is a tectonically active sedimentary region of Azerbaijan where geological and hydrogeological conditions may favor geothermal fluid circulation. This study develops a Geographic Information Systems (GIS)-based multi-cr...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/en19174061
Jing Cui, Jiayu Ye, Zhongyi Chu • Shock and Vibration
(2018)
With the development of industrial production, drive systems are demanded for larger inertias of motors and load machines, whereas shafts should be lightweight. In this situation, it will excite mechanical vibrations in load side, which is ...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2018/1329876
Andrei Kiraly, Monica Balcau • Journal of Industrial Design and Engineering Graphics
(2019)
Prior to planting, the soil must be prepared usually by machines called cultivators. Older field cultivators are suitable for modification for row cropping. The crops and the tractor power available will determine specific needs. Factors to...
DOAJ
Open Access (DOAJ)
Petros Petrounias, Panagiota P. Giannakopoulou, Aikaterini Rogkala, Maria Kalpogiannaki et al. • Applied Sciences
(2022)
This study was based on the reduction of the extraction of natural resources and, at the same time, was focused on the use of by-products and various wastes in construction applications by following the principles of circular economy. Steri...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app12125861
Rasoul Yarahmadi, Hamed Moridi, Ali Asghar Farshad, Fereshteh Taheri • Salāmat-i kār-i Īrān
(2020)
Abstract:
Aim and Background: Today, with the growth of different dimensions of sustainable development, managers at the organizational and governmental levels have become more and more interested in the components of sustainable developmen...
DOAJ
Open Access (DOAJ)