Reset
Showing 20 of 858 academic articles

Research report on green and low-carbon development of superhard material industry

Lijuan LI, Beibei ZHANG, Zhaoda SUN • Jin'gangshi yu moliao moju gongcheng (2023)

Under the background of the comprehensive implementation of the National Carbon Peak Carbon Neutralization Action, the superhard material industry energy consumption research was carried out. It aims to promote the superhard material indust...

DOAJ Open Access (DOAJ) DOI: 10.13394/j.cnki.jgszz.2023.1001

Experimental study on the impact of sulfate attack on the performance of shaft lining concrete under sustained compressive load

Guo-qiang Xu, Wei Zhang, Si Chen, Zhen-kai Zhu et al. • Case Studies in Construction Materials (2024)

To investigate the impact of sulfate corrosion on the performance of shaft lining concrete under sustained compressive loads, this study immersed samples in a 10 % sodium sulfate solution after subjecting to sustained compressive loads of 0...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.cscm.2024.e03657

Formation of surfaces oxide vacancies in porous ZnCo2O4 nanoflowers for enhanced energy storage performance

Deyang Zhang, Binhe Feng, Wenbo Guo, Jinbing Cheng et al. • Discover Nano (2025)

Abstract A cost-effective and large-scale method for synthesizing ZnCo2O4 nanoflowers with surface oxygen vacancies as electrode materials for supercapacitors is presented. The existence of oxygen vacancies on the surface of the ZnCo2O4 nan...

DOAJ Open Access (DOAJ) DOI: 10.1186/s11671-025-04347-y

Nuclear engineering

E. U. Condon • Electrical Engineering (1948)

“Atomic power” depends upon the possibility of producing a chain reaction, analogous to that of burning, which will be self-sustaining. Only when the fission of uranium was discovered did nuclear energy become of engineering concern. This i...

OPENALEX DOI: https://doi.org/10.1109/ee.1948.6444007

Nuclear Engineering Fundamentals

Robert E. Masterson • CRC Press eBooks (2017)

NUCLEAR ENGINEERING FUNDAMENTALS is the most modern, up-to-date, and reader friendly nuclear engineering textbook on the market today. It provides a thoroughly modern alternative to classical nuclear engineering textbooks that have not been...

OPENALEX DOI: https://doi.org/10.1201/9781315156781

Introduction to Nuclear Engineering

Supathorn Phongikaroon • CRC Press eBooks (2023)

Introduction to Nuclear Engineering serves as an accompanying study guide for a complete, introductory single-semester course in nuclear engineering. It is structured for general class use, alongside fundamental nuclear physics and engineer...

OPENALEX DOI: https://doi.org/10.1201/9781003272588

Introduction to Nuclear Engineering

John R. Lamarsh, Edward Melkonian • Physics Today (1977)

(Most chapters end with References and Problems). 1. Nuclear Engineering. 2. Atomic and Nuclear Physics. Fundamental Particles. Atomic and Nuclear Structure. Atomic and Molecular Weight. Atomic and Nuclear Radii. Mass and Energy. Particle W...

OPENALEX DOI: https://doi.org/10.1063/1.3037597

Rich: Region-based Intelligent Cluster-Head Selection and Node Deployment Strategy in Concentric-based WSNs

FAN, C.-S. • Advances in Electrical and Computer Engineering (2013)

In a random deployment, sensor nodes are scattered randomly in the sensing field. Hence, the coverage can not be guaranteed. In contrast, the coverage of uniformly deployment is in general larger than the random deployment. However, unifo...

DOAJ Open Access (DOAJ) DOI: 10.4316/AECE.2013.04001

Effect of Systematic Control of Pd Thickness and Annealing Temperature on the Fabrication and Evolution of Palladium Nanostructures on Si (111) via the Solid State Dewetting

Sundar Kunwar, Puran Pandey, Mao Sui, Quanzhen Zhang et al. • Nanoscale Research Letters (2017)

Abstract Si-based optoelectronic devices embedded with metallic nanoparticles (NPs) have demonstrated the NP shape, size, spacing, and crystallinity dependent on light absorption and emission induced by the localized surface plasmon resonan...

DOAJ Open Access (DOAJ) DOI: 10.1186/s11671-017-2138-1

A case study on morphological aspects of distinct magnetized 3D hybrid nanoparticles on fluid flow between two orthogonal rotating disks: An application of thermal energy systems

Zahra Abdelmalek, M. Zubair Akbar Qureshi, S. Bilal, Qadeer Raza et al. • Case Studies in Thermal Engineering (2021)

The consolidation power of different nanomaterials such as metallic nanoparticles and metallic-oxides nanoparticles in a new-fangled and energetic hybrid material should give rise to fascinating properties that combine the advantages of eac...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2020.100744

Lab-scale coin-cell supercapattery assembled with nickel cobaltite/rGO nanocomposite electrodes for hybrid energy storage

B. Raghavendra Babu, R. Sasikumar, K. Visagavel, R. Baskar • Next Nanotechnology (2026)

Hybrid energy storage devices that bridge the gap between batteries and supercapacitors are critical for next-generation portable and high-power applications. In this work, a lab-scale coin cell asymmetric supercapattery device is fabricate...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.nxnano.2026.100892

Field Observations and Failure Analysis of an Excavation Damaged Zone in the Horonobe Underground Research Laboratory

Kazuhei AOYAGI, Eiichi ISHII, Tsuyoshi ISHIDA • Journal of MMIJ (2017)

In the construction of a deep underground facility, the hydromechanical properties of the rock mass around an underground opening are changed significantly due to stress redistribution. This zone is called an excavation damaged zone (EDZ). ...

DOAJ Open Access (DOAJ) DOI: 10.2473/journalofmmij.133.25

Stability Mechanism and Repair Method of U-Shaped Steel Reverse Arch Support in Soft Floor Roadway

Chao Wang, Xiaoyi Chen, Jiandong Zhang, Yongping Wu • Advances in Civil Engineering (2020)

This paper is aimed at the inverted arch support instability of track roadway with mining level +1100 m in Liuyuanzi Coal Mine. By means of field investigation, theoretical analysis, numerical calculation, and engineering practice, the inst...

DOAJ Open Access (DOAJ) DOI: 10.1155/2020/8814365

Advancements in Ni‐based Catalysts for Direct Urea Fuel Cells: A Comprehensive Review

Yulia M. T. A. Putri, Muhammad I. Syauqi, Isnaini Rahmawati, Aliyah Aliyah et al. • ChemElectroChem (2024)

Abstract The growing demand for sustainable energy sources has spurred significant studies to optimize the potency of fuel cell technology. Direct urea fuel cell (DUFC) has gained attention due to their energy density, eco‐friendliness, and...

DOAJ Open Access (DOAJ) DOI: 10.1002/celc.202300637

Anti-Bacterial Microgel Synthesis: Sonochemical Modification of Carbopol for Hygienic Applications

Aghil Asadi, Mohsen Najafi, Hossien Bouhnedi, Mehdi Haji Bagherian • علوم و تکنولوژی پلیمر (2021)

Hypothesis: The volume of studies conducted on biopolymeric materials emphasizes the high-consumption of polymers in biomaterial fields, especially in cosmetics industry which must be resistant to different kinds of microorganisms and bacte...

DOAJ Open Access (DOAJ) DOI: 10.22063/jipst.2021.1779