Home »
Academic Articles & Research Papers
Showing 20 of 6,973 academic articles
Guoping Ding, Yixuan Zhang, Yong Zhu • Advanced Composites Letters
(2019)
The advantages of carbon fiber-reinforced plastic (CFRP) box girders include good bending resistance, lightweight and high strength. Therefore, they are widely used in aerospace, rail transit, and other fields. When the CFRP box girder is s...
DOAJ
Open Access (DOAJ)
DOI: 10.1177/2633366X19891171
Nnamdi C. Aronwora, Chibuzo Nwabufo Okwuosa, Jang-Wook Hur • IEEE Access
(2026)
The rate of capacity fade in a lithium-ion battery following a transition to a new discharge current is widely assumed to equal that of a battery that has always operated at the destination current, an implicit premise referred to here as l...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2026.3732470
Md. Jisan Mahmud, Ahmed Imtiaz Rais, Md. Rakib Hossain, Sumon Saha • Heliyon
(2022)
The current study investigates conjugate mixed convection heat transmission with internal heat generation in a square enclosure driven by a sliding lid and a solid cylinder with a heat-conducting surface at its center. The enclosure has a s...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.heliyon.2022.e11968
Shuzhi Su, Penglian Gao, Yanmin Zhu, Xingzhu Liang et al. • IEEE Access
(2021)
In multi-view learning, massive literature is devoted to exploring the intrinsic structure between cross-views. It is well known that canonical correlation analysis (CCA) is a conventional multi-view learning method, which considers the cor...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2021.3118023
Yebing Tian, Chengjin Tian, Sohini Chowdhury, Jinguo Han et al. • Journal of Materials Research and Technology
(2023)
A novel body-armour-like abrasive tool (BAAT) was developed for the high-shear and low-pressure grinding of super alloys with an aim to reduce the ratio of normal force to tangential force. A composite process model was developed based on f...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2023.04.205
Tanimu Kogi Ibrahim, Danjuma Saleh Yawas, Julius Thaddaeus, Bashar Danasabe et al. • Scientific Reports
(2024)
Abstract This study focuses on optimizing double stir casting process parameters to enhance the tensile strength of hybrid composites comprising aluminum alloy, brown pumice, and coal ash, intended for brake disc applications. Analytical te...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-024-67476-x
Ivica Kladarić, Stjepan Golubić, Danko Ćorić, Andrijana Milinović • Metals
(2026)
The article examines the effect of different types of two-layer nanostructured coatings (cVIc and nACVIc) deposited on three types of steel substrates, 45S20, C45E, and 42CrMo4, to determine the resistance to adhesive wear of the substrate/...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/met16020130
Donghwan Song, Adrian Matias Chung Baek, Jageon Koo, Moise Busogi et al. • Applied Sciences
(2020)
Over the past decades, additive manufacturing has rapidly advanced due to its advantages in enabling diverse material usage and complex design production. Nevertheless, the technology has limitations in terms of quality, as printed products...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app10248951
Syed Bustan Fatima Warsi, Biranchi Panda, Pankaj Biswas • Developments in the Built Environment
(2023)
3D Concrete Printing (3DCP) is a growing field of sustainable technology that offers an avenue for rapid industrialisation of the construction industry. Over the years, many non-structural elements have been fabricated by 3D printing, thus ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.dibe.2023.100295
M. Iftakhar Alam, Jafrin Sultana • Austrian Journal of Statistics
(2019)
One of the most challenging tasks in clinical trials is finding the maximum tolerated dose (MTD) to be tested in the next phase. An assurance for the safety of the patients and recommendation of a suitable dose for phase II are the main obj...
DOAJ
Open Access (DOAJ)
DOI: 10.17713/ajs.v48i5.883
Stilianos Fodelianakis, Alexander Lorz, Adriana Valenzuela-Cuevas, Alan Barozzi et al. • Nature Communications
(2019)
Fodelianakis et al. examine the role of immigration and selection as the means of community homogenisation in a bacterial metacommunity. They confirmed the role of immigration in homogenisation, even when immigration was four times slower t...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41467-019-09306-7
Xuejian Li, Huaqiang Du, Guomo Zhou, Fangjie Mao et al. • GIScience & Remote Sensing
(2023)
Vegetation phenology has long been adapted to environmental change and is highly sensitive to climate change. Shifts in phenology also affect feedbacks of vegetation to environmental factors such as topography and climate by influencing spati...
DOAJ
Open Access (DOAJ)
DOI: 10.1080/15481603.2022.2163575
Wuwei Feng, Hongya Chen, Qingping Zou, Di Wang et al. • Energies
(2024)
Wireless monitoring systems for the marine environment are important for rapidly growing subsea developments. The power supply of wireless sensor nodes within the monitoring systems, however, is a major challenge. This study proposes a nove...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/en17040876
Farzana Kastury, Silvia Placitu, John Boland, Ranju R. Karna et al. • Environment International
(2019)
In this study, an in vitro in vivo correlation (IVIVC) between Pb in vitro bioaccessibility (IVBA) and relative bioavailability (RBA) was explored to determine whether the efficacy of Pb immobilization in phosphate amended soils could be pr...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.envint.2019.104967
Carola Grebitus, Lauren Chenarides, Rebecca Muenich, Alex Mahalov • Frontiers in Sustainable Food Systems
(2020)
Urban agriculture offers the opportunity to provide fresh, local food to urban communities. However, urban agriculture can only be successfully embedded in urban areas if consumers perceive urban farming positively and accept urban farms in...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fsufs.2020.00079
Ibrahim Abbas, Aboelnour Abdalla, Areej Almuneef, Alaa A. El-Bary • Case Studies in Thermal Engineering
(2025)
This study investigates generalized thermoelastic interaction in porous asphaltic materials subjected to thermal loading, using fractional model with time-delay effects. The framework incorporates the Riemann-Liouville fractional derivative...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.csite.2025.106304
J.T. Ferreira, A. Bekker, M. Arashi • Revstat Statistical Journal
(2020)
This paper paves the way when the assumption of normality is challenged within the wireless communications systems arena. Innovative results pertaining to the distributions of quadratic forms and their associated eigenvalue density function...
DOAJ
Open Access (DOAJ)
DOI: 10.57805/revstat.v18i3.299
Oteng Maphane • International Journal of Mathematics and Mathematical Sciences
(2021)
Let Gk,nℂ for 2≤k...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2021/6687527
Chang Suk Lee, Kyung-Soo Han, Jong-Min Yeom, Kyeong-sang Lee et al. • GIScience & Remote Sensing
(2018)
The surface albedo is an essential climate variable that is considered in many applications used for predicting climate and understanding the mechanisms of climate change. In this study, surface albedo was estimated using a bidirectional re...
DOAJ
Open Access (DOAJ)
DOI: 10.1080/15481603.2017.1360578
Saeed Bidi, Phoevos Koukouvinis, Andreas Papoutsakis, Armand Shams et al. • Ultrasonics Sonochemistry
(2022)
An explicit density-based solver of the Euler equations for inviscid and immiscible gas–liquid flow media is coupled with real-fluid thermodynamic equations of state supporting mild dissociation and calibrated with shock tube data up to 500...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.ultsonch.2022.106175