Home »
Academic Articles & Research Papers
Showing 20 of 9,867 academic articles
Shwetha Singaram, Claude-Hélène Mayer • Frontiers in Psychology
(2022)
The Fourth Industrial Revolution (4IR) is known to transform and create opportunities for the world of work. However, little is known about how the future workforce, such as university students, are being equipped and exposed to 4IR technol...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fpsyg.2022.919157
Rašuo Boško, Dinulović Mirko, Trninić Marta, Stamenović Marina et al. • FME Transactions
(2021)
Noise is becoming one of the problems in many industrial applications. In this paper the aerodynamic noise in air duct system that arises from air flow passing over a surface of turning vanes is investigated. Based on Proudman's formula usi...
DOAJ
Open Access (DOAJ)
DOI: 10.5937/fme2102308R
Alan Marshall • Diseña
(2018)
The Fantasy Method of Urban Design is an experimental cross-disciplinary method that aims to predict the future social and technological forces impacting upon our cities, and to design such cities in line with these predictions. Utilizing f...
DOAJ
Open Access (DOAJ)
CHEN Yao, XIONG Zhenghui, LUO Junwei, WANG Hanyang et al. • Journal of Aeronautical Materials
(2025)
Traditional ultrasonic automated non-destructive testing is a great challenge in the inspection of aviation components with complex surfaces. Complex surfaces can interfere with the formation of the focus in the sound beam，and the waveform ...
DOAJ
Open Access (DOAJ)
DOI: 10.11868/j.issn.1005-5053.2024.000173
Tomohiro Furuki, Tomohiro Nobeyama, Shunji Suetaka, Ryokei Matsui et al. • Food Chemistry: X
(2024)
Reentrant condensation (RC) is a protein behavior in which the protein solution shifts between the one- and two-phase state more than twice by increasing a single parameter. Although RC would be a candidate mechanism for the physicochemical...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.fochx.2024.101165
Reshetnikov I.F., Shikhalev S.V., Tikhonov S.L. • Problems of the Regional Energetics
(2018)
The aim of the article is a quantitative assessment of the influence of non-condensable gases on the intensity of heat and mass transfer processes during film condensation of steam in the specific conditions for heat exchanger. The task is ...
DOAJ
Open Access (DOAJ)
DOI: 10.5281/zenodo.2222362
Koray Özcan • Coğrafya Dergisi
(2020)
It is known that national development efforts in the foundation process of the Republic of Turkey happened within the spatial organization and functional development processes of the settlements that took place both in urban and rural conte...
DOAJ
Open Access (DOAJ)
DOI: 10.26650/JGEOG2019-0033
Prince Jose, Marie-Theres Suer, Lars Wolf • IEEE Access
(2026)
Wi-Fi has become a fundamental wireless communication technology, supporting a wide range of applications while continuing to evolve to meet increasingly demanding use cases. Future Wi-Fi networks are expected to support industrial and time...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2026.3725357
Dmitry Mikhaylyuk / Дмитрий Павлович Михайлюк, Amir Kader / Амир Святославович Кадер • Индустрии впечатлений: Технологии социокультурных исследований
(2025)
The aim of the research is to identify the evolutionary scenario and the specifics of the transformation of the child's image in Russian art, primarily using Soviet cinema as an example, taking into account the experience of world art devel...
DOAJ
Open Access (DOAJ)
DOI: 10.34680/EISCRT-2025-4(13)-52-95
Caricato A., Ficarella A., Chiodo L. Spada • E3S Web of Conferences
(2021)
Predictive maintenance is the latest frontier in the management and maintenance of many industrial assets, including aeroengines. Made possible by last decades advances in monitoring equipment and machine learning algorithms, it permits ind...
DOAJ
Open Access (DOAJ)
DOI: 10.1051/e3sconf/202131211017
Beatryz C. Mendes, Leonardo G. Pedroti, Carlos Maurício F. Vieira, José Maria F. Carvalho et al. • Case Studies in Construction Materials
(2022)
Geopolymers are binder materials that can be an alternative to replace Portland cement. They are considered less aggressive to the environment because of the lower emission of CO2 and use of energy in their production chain. This work aimed...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.cscm.2021.e00847
Syam Babu Bokka, Anil Kumar Birru, Amandeep Kaur, Netai Chandr Dey et al. • Proceedings on Engineering Sciences
(2024)
The COVID-19 lockdown has had a significant negative impact on the automotive industry, particularly on the small and medium-sized businesses and daily wage workers who rely on autonagar industrial area as their main source of income. Emplo...
DOAJ
Open Access (DOAJ)
DOI: 10.24874/PES.SI.25.03b.010
Kuchkarova Dilarom, Achilova Dilnoza • E3S Web of Conferences
(2021)
Natural relief adjustment for functional purpose - the task of vertical planning - is one of the main complexes of engineering preparation problems of urban areas, industrial sites, reclamation of irrigated land. Numerous methods of designi...
DOAJ
Open Access (DOAJ)
DOI: 10.1051/e3sconf/202126403029
Hüseyin Peker, Ümit Ayata, Göksel Ulay • Drewno
(2025)
Scots pine wood represents one of the important tree species used by the wood processing industry in many countries for both interior and exterior applications. It is well known that thermal treatment alters the color of wood. To protect wo...
DOAJ
Open Access (DOAJ)
DOI: 10.53502/wood-201974
Enis Ben Bnina, Jihen Missaoui, Mohamed Firas Gannouni, Lotfi Achour et al. • OpenNano
(2026)
Food safety and control are fundamental public health issues that maintain consumer confidence and protection. This design (management) requires monitoring production, processing, and conservation processes while limiting microbiological, c...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.onano.2026.100286
Katja Andrina Kravanja, Matjaž Finšgar, Željko Knez, Maša Knez Marevci • Frontiers in Materials
(2022)
The development of drug-eluting bioactive coatings for orthopedic implants has gained increased interest in recent years with an intent to reduce postoperative complications and improve tissue regeneration at the implant interface. Due to t...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fmats.2022.878176
Cunchao Zhao, Muhammad Aaqil, Rui He, Muhammad Kamil et al. • Journal of Advanced Research
(2026)
Background: Edible and medicinal mushroom polysaccharides (EMMPs) display wide-ranging bioactivities, yet progress has been limited by siloed workflows. Extraction, structural analysis, and biological evaluation are often conducted independ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jare.2025.12.040
M. Abdunnabi, A. Abusalama, M. Algamil, M. Almontaser • Solar Energy and Sustainable Development
(2018)
Water heating in Libyan domestic sector represents over 29% of the total electrical consumption. There is a great potential of hot water usage in the industrial and other sectors. Solar energy can play vital role in providing hot water to t...
DOAJ
Open Access (DOAJ)
LU Zhangpin • Yishu yu sheji
(2010)
Industrial design not only thinks highly of the self of product,but also makes people experience the joy when using it.The self goodness of product expresses the self beauty and the value beauty,and the art and technology melt together the ...
OPENALEX
Margaret Ann Wilkinson, Amy Muhlstein • Scholarship@Western (Western University)
(1999)
The scope of the Industrial Design Act in Canada is much narrower than the concept of industrial designs, as original and unique manufactured objects, in industry. Indeed, the Industrial Design Act applies only to the aspects of industrial ...
OPENALEX
public-domain