Home »
Academic Articles & Research Papers
Showing 20 of 522 academic articles
Rajavel Dhandabani, Shantharajah S. Periyasamy, Padma Theagarajan, Arun Kumar Sangaiah • IET Networks
(2018)
This paper deals with the novel approach to generate cubical key that symbolises the message and key in six‐face cubical structure. The cubical message is hybridised to generate the cipher in the encryption. Hybridisation of cubes is perfor...
DOAJ
Open Access (DOAJ)
DOI: 10.1049/iet-net.2017.0196
Gamze Bilgen, Omer Faruk Altuntas • Case Studies in Construction Materials
(2023)
The amount of waste materials such as dredged materials (DM) and waste glass (WG) have been growing exponentially since the middle of the 20th century. The most important problem created by them is the lack of space to be used for storage b...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.cscm.2022.e01815
HOU YanYan, CHANG Qing, HU XiWen, PENG XianLong • Jixie qiangdu
(2023)
Active gear design is a method that can pre-control gear meshing performance directly. In order to study the influence of active gear design on the bearing characteristics of tooth surface, the relationship between active modification param...
DOAJ
Open Access (DOAJ)
Guo-qiang Xu, Wei Zhang, Si Chen, Zhen-kai Zhu et al. • Case Studies in Construction Materials
(2024)
To investigate the impact of sulfate corrosion on the performance of shaft lining concrete under sustained compressive loads, this study immersed samples in a 10 % sodium sulfate solution after subjecting to sustained compressive loads of 0...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.cscm.2024.e03657
D. H. Fu, Y. H. Zhan, N. Yan, H. S. Xia • eXPRESS Polymer Letters
(2015)
Natural rubber containing graphene and carbon nanotubes (CNTs) composites were prepared by ultrasonicallyassisted latex mixing. Natural rubber filled by both graphene and CNTs show significant enhanced tensile strength, while graphene exhib...
DOAJ
Open Access (DOAJ)
DOI: 10.3144/expresspolymlett.2015.56
亢淑梅, 于长鸿, 沈明钢, 赵昌明 et al. • Teshugang
(2016)
According the issue of Al-CaO complex deoxidizer for clean steel easily crushing during process of falling from 10 meters high burden bin led to low utilization, increase of cost and dust pollution in situ, the effect of adding epoxy resin,...
DOAJ
Open Access (DOAJ)
Hao Huang, Qunzhang Tu, Chengming Jiang, Ming Pan et al. • IEEE Access
(2021)
This paper proposed control schemes to realize the collaborative control as well as enhance the control precision for the distributed driving electric vehicle (DDEV). Firstly, we suggested an electronic line-shafting (ELS) to realize the co...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2021.3062829
Yaser Pourmazaheri, Hamid Soltanian • Journal of Petroleum Science and Technology
(2015)
The design of cement slurry for horizontal wellbores is challenging as it must present very high quality cement slurry properties e.g. zero free water, less than 50 cc API fluid loss value, appropriate rheology and yield point for effective...
DOAJ
Open Access (DOAJ)
DOI: 10.22078/jpst.2015.504
M.A. Bajaber, I.Y. Hakeem • Journal of Materials Research and Technology
(2021)
An advanced development in construction industry was achieved by applying ultra-high-performance concrete technology (UHPC). Intensive research efforts had been concentrated in construction to produced amazing levels of qualities with stren...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2020.12.051
B. Oleksiak, M. Kozioł, J. Wieczorek, M. Krupa et al. • Metalurgija
(2015)
In the present paper, results of the research on application of residual fine-grained, carbon-bearing materials as coke substitutes in the shaft process of copper matter smelting are discussed. The addition was introduced into the charge as...
DOAJ
Open Access (DOAJ)
Aghil Asadi, Mohsen Najafi, Hossien Bouhnedi, Mehdi Haji Bagherian • علوم و تکنولوژی پلیمر
(2021)
Hypothesis: The volume of studies conducted on biopolymeric materials emphasizes the high-consumption of polymers in biomaterial fields, especially in cosmetics industry which must be resistant to different kinds of microorganisms and bacte...
DOAJ
Open Access (DOAJ)
DOI: 10.22063/jipst.2021.1779
Guoping Ding, Yixuan Zhang, Yong Zhu • Advanced Composites Letters
(2019)
The advantages of carbon fiber-reinforced plastic (CFRP) box girders include good bending resistance, lightweight and high strength. Therefore, they are widely used in aerospace, rail transit, and other fields. When the CFRP box girder is s...
DOAJ
Open Access (DOAJ)
DOI: 10.1177/2633366X19891171
Tanimu Kogi Ibrahim, Danjuma Saleh Yawas, Julius Thaddaeus, Bashar Danasabe et al. • Scientific Reports
(2024)
Abstract This study focuses on optimizing double stir casting process parameters to enhance the tensile strength of hybrid composites comprising aluminum alloy, brown pumice, and coal ash, intended for brake disc applications. Analytical te...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-024-67476-x
Syed Bustan Fatima Warsi, Biranchi Panda, Pankaj Biswas • Developments in the Built Environment
(2023)
3D Concrete Printing (3DCP) is a growing field of sustainable technology that offers an avenue for rapid industrialisation of the construction industry. Over the years, many non-structural elements have been fabricated by 3D printing, thus ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.dibe.2023.100295
Farzana Kastury, Silvia Placitu, John Boland, Ranju R. Karna et al. • Environment International
(2019)
In this study, an in vitro in vivo correlation (IVIVC) between Pb in vitro bioaccessibility (IVBA) and relative bioavailability (RBA) was explored to determine whether the efficacy of Pb immobilization in phosphate amended soils could be pr...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.envint.2019.104967
Yener Ulus, Yener Ulus, Shaoyi Wang, Shaoyi Wang et al. • Frontiers in Environmental Science
(2025)
Wildfires are an integral component of Mediterranean ecosystems. The forest management practices implemented following such forest fires can significantly influence soil chemistry and metal dynamics. This study investigates the effects of d...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fenvs.2025.1661652
Alcides Nóbrega Sial, Jiubin Chen, Christoph Korte, Manoj Kumar Pandit et al. • Frontiers in Earth Science
(2021)
High-resolution organic carbon isotope (δ13C), Hg concentration and Hg isotopes curves are presented for the Permian-Triassic boundary (PTB) sections at Guryul Ravine (India) and Meishan D (China). The total organic carbon (TOC)-normalized ...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/feart.2021.651224
Oladimeji Alabi • Transcultural Journal of Humanities and Social Sciences
(2023)
The use of diplomacy as a statecraft was visible in precolonial Africa. It was primarily concerned with relations among states to achieve mutually beneficial agreements. Diplomacy in precolonial Africa included trade treaties, protection, s...
DOAJ
Open Access (DOAJ)
DOI: 10.21608/tjhss.2023.322448
Zdeňka Matyušová • Opera slavica
(2014)
Vasiliy Belov (1932–2012) belongs to the noticeable representatives of the so called Russian Rural Prose. He started his literary activities as a poet and his strong poetic feelings found their expression in lyrically full prose. His work i...
DOAJ
Open Access (DOAJ)
Jazmín Vanessa Pérez-Pazos, Deimer Fuentes-Cassiani, Sol-Mara Regino, Jorge-Luis García et al. • Plants
(2025)
The production of high-quality cassava planting material is a key strategy for mitigating the spread of pests and diseases. To promote the adoption of such strategies by farmers, it is essential to strengthen local capacities through knowle...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/plants14192983