Reset
Showing 20 of 36 academic articles

Study of the corrosion properties of powder rolled Ti–6Al–4V alloy applied in the biomedical implants

Mandlenkosi G.R. Mahlobo, Lethu Chikosha, Peter A. Olubambi • Journal of Materials Research and Technology (2022)

Great efforts have been made in fabricating Ti–6Al–4V alloys that can be used in the biomedical implants industry. The increasing interest in using fabricated Ti–6Al–4V alloys in industrial applications is mainly due to the properties of al...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2022.04.004

The role of MgBr2 to enhance the ionic conductivity of PVA/PEDOT:PSS polymer composite

Eslam M. Sheha, Mona M. Nasr, Mabrouk K. El-Mansy • Journal of Advanced Research (2015)

A solid polymer electrolyte system based on poly(vinyl alcohol) (PVA) and poly(3,4-Etylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) complexed with magnesium bromide (MgBr2) salt was prepared using solution cast technique. The ionic...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jare.2014.01.010

The use of tear ferning test in cats for evaluation of ocular surface

Jéssica Fontes Veloso, Arianne Pontes Oriá, Ana Cláudia Santos Raposo, Ariane Jesus Lacerda et al. • Acta Veterinaria Scandinavica (2020)

Abstract Background The tear film is a trilaminar fluid composed mainly of lipids, electrolytes, proteins and water. It is responsible for lubrication, nutrition and protection against microbial and toxic agents. Disruption of any these com...

DOAJ Open Access (DOAJ) DOI: 10.1186/s13028-020-00523-5

A database of experimentally measured lithium solid electrolyte conductivities evaluated with machine learning

Cameron J. Hargreaves, Michael W. Gaultois, Luke M. Daniels, Emma J. Watts et al. • npj Computational Materials (2023)

Abstract The application of machine learning models to predict material properties is determined by the availability of high-quality data. We present an expert-curated dataset of lithium ion conductors and associated lithium ion conductivit...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41524-022-00951-z

Temperature- and vacancy-concentration-dependence of heat transport in Li3ClO from multi-method numerical simulations

Paolo Pegolo, Stefano Baroni, Federico Grasselli • npj Computational Materials (2022)

Abstract Despite governing heat management in any realistic device, the microscopic mechanisms of heat transport in all-solid-state electrolytes are poorly known: existing calculations, all based on simplistic semi-empirical models, are unr...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41524-021-00693-4

Synthesis and Characterization of a Gel-Type Electrolyte with Ionic Liquid Added for Dye-Sensitized Solar Cells

Le-Yan Shi, Tien-Li Chen, Chih-Hao Chen, Kun-Ching Cho • International Journal of Photoenergy (2013)

This study intends to develop the electrolyte needed in dye-sensitized solar cells (DSSCs). Moreover, three different ionic liquids in different molalities are added to the gel-type electrolyte. Experimental results show that the DSSC compo...

DOAJ Open Access (DOAJ) DOI: 10.1155/2013/834184

Recent progress in tailoring Ni-rich layered oxides via coating and doping strategies for enhanced lithium-ion battery performance

Ha Eun Kang, Seong-Do Kim, Young Soo Yoon, Sang-Jin Lee • Applied Surface Science Advances (2025)

Nickel-rich layered oxide cathodes, typified by compositions such as LiNi₁₋ₓ₋ᵧCoₓMnᵧO₂ (NCM) have garnered significant attention as high-energy-density candidates for next-generation lithium-ion batteries. However, their widespread deployme...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.apsadv.2025.100826

Defect Engineering of Disordered Carbon Anodes with Ultra-High Heteroatom Doping Through a Supermolecule-Mediated Strategy for Potassium-Ion Hybrid Capacitors

Lei Zhao, Shirong Sun, Jinxin Lin, Lei Zhong et al. • Nano-Micro Letters (2023)

Highlights The N/S co-doped lignin-derived porous carbon (NSLPCs) with ultra-high heteroatom doping was prepared through a novel supramolecule-mediated pyrolysis strategy. Covalently bonded graphitic carbon/amorphous carbon intermediates in...

DOAJ Open Access (DOAJ) DOI: 10.1007/s40820-022-01006-0

Synthesis and electrochemical characterization of iron oxide/poly(2-methylaniline) nanohybrids for supercapacitor application

Ahmed Ashour M., Essam Doaa, Kabatas Mohamed A. Basyooni-M., Abdel-Khaliek Ahmed A. et al. • Nanotechnology Reviews (2025)

This study reports the synthesis of a nanohybrid material composed of poly(2-methylaniline) (P(2MA)) and iron oxide (Fe2O3) as electrodes for supercapacitors using a simple and cost-effective method. Various characterization techniques were...

DOAJ Open Access (DOAJ) DOI: 10.1515/ntrev-2025-0189

Tailoring the LiNbO3 coating of Ni-rich cathode materials for stable and high-performance all-solid-state batteries

Seyedhosein Payandeh, Florian Strauss, Andrey Mazilkin, Aleksandr Kondrakov et al. • Nano Research Energy (2022)

The research and development of advanced nanocoatings for high-capacity cathode materials is currently a hot topic in the field of solid-state batteries (SSBs). Protective surface coatings prevent direct contact between the cathode material...

DOAJ Open Access (DOAJ) DOI: 10.26599/NRE.2022.9120016

Hybrid coatings for orthopaedic implants formed by physical vapour deposition and microarc oxidation

Roman Gabor, Ladislav Cvrček, Martina Doubková, Václav Nehasil et al. • Materials & Design (2022)

This study is focused on the preparation of new hybrid layers intended for surface modification of Ti-6Al-4V alloys for potential orthopaedic and dental applications. Combination of the technology of physical vapour deposition (PVD) and sub...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2022.110811

The Application of Electrospun Titania Nanofibers in Dye-sensitized Solar Cells

Hana Krysova, Arnost Zukal, Jana Trckova-Barakova, Aravind Kumar Chandiran et al. • CHIMIA (2013)

Titania nanofibers were fabricated using the industrial NanospiderTM technology. The preparative protocol was optimized by screening various precursor materials to get pure anatase nanofibers. Composite films were prepared by mixing a comme...

DOAJ Open Access (DOAJ) DOI: 10.2533/chimia.2013.149

Leaching and recycling of NdFeB permanent magnets using ionic non-toxic hydrotropes instead of extractants

Asmae El Maangar, Clément Fleury, Stéphane Pellet-Rostaing, Thomas Zemb • Frontiers in Chemical Engineering (2024)

We show hereby that recycling of NdFeB permanent magnets by selective leaching and precipitation is possible, using an electrolyte as hydrotrope, thus avoiding the need of any specific extractant molecules. We analyse the yield of the extra...

DOAJ Open Access (DOAJ) DOI: 10.3389/fceng.2024.1420008

A Rechargeable Zinc–Copper Voltaic Battery Built from Cost-Effective Electrodes and Electrolytes

Jose Fernando Florez Gomez, Songyang Chang, Irfan Ullah, Juan C. Velez Reyes et al. • Batteries (2026)

The zinc–copper (Zn-Cu) voltaic battery is the first battery made in human history, but the Cu2+ dissolution issue leads to the reaction’s irreversibility. To tackle this challenge, solid-state electrolytes, ion exchange membranes, and func...

DOAJ Open Access (DOAJ) DOI: 10.3390/batteries12060215