Reset
Showing 20 of 168 academic articles

Application of Electric Field to Developing Falling Films using Wire-Plate Electrode Configuration- An Experimental Study

R. Rouhollahi, S. Baheri Islami, R. Gharraei, M. R. Heirani Nobari • Journal of Applied Fluid Mechanics (2018)

Experimental investigation of Electrohydrodynamic developing falling film flow of transformer oil has been conducted within an inclined rectangular channel and hydrodynamic characteristics of the flow have been revealed. The electric field ...

DOAJ Open Access (DOAJ)

Development of Hemp-Containing Denim Fabrics: A Comparative Study of Mechanical and Dimensional Properties

Gamze Okyay Sezer • Journal of Natural Fibers (2026)

Increasing environmental impact of conventional cotton denim production and concerns regarding cotton cultivation under changing climatic conditions have intensified the search for more sustainable raw material alternatives. Hemp is a promi...

DOAJ Open Access (DOAJ) DOI: 10.1080/15440478.2026.2734659

Design and Anthropology

Keith M. Murphy • Annual Review of Anthropology (2016)

In this review, I examine the recent turn to design in anthropology in three different configurations: anthropology of design, anthropology for design, and design for anthropology. Although these three configurations represent different cut...

OPENALEX Open Access DOI: https://doi.org/10.1146/annurev-anthro-102215-100224

Effectiveness and cost-effectiveness of community perinatal mental health services on access, experience, recovery/relapse and obstetric and neonate outcomes: the ESMI-II mixed-methods study

Heather O’Mahen, Louise Howard, Helen Sharp, Antoinette Davey et al. • Health and Social Care Delivery Research (2025)

Background Perinatal mental health disorders affect one in five mothers during pregnancy or within 2 years post childbirth. These disorders can lead to poor pregnancy and childbirth outcomes and maternal deaths. Additionally, they negativel...

DOAJ Open Access (DOAJ) DOI: 10.3310/RRAP0011

Experimentation in Political Science

James N. Druckman, DONALD PHILIP GREEN, James H. Kuklinski, Arthur Lupia • Cambridge University Press eBooks (2011)

In his 1909 American Political Science Association presidential address, A. Lawrence Lowell (1910) advised the fledgling discipline against following the model of the natural sciences: “We are limited by the impossibility of experiment. Pol...

OPENALEX DOI: https://doi.org/10.1017/cbo9780511921452.001

Maritime Business Administration

Gül Denktaş Şakar, Durmuş Ali Deveci, A. Güldem Cerit (2026)

Maritime transport, as an important component of global supply chains, requires the coordination and thorough integration of related functions combining the ship, cargo, and relevant players and actors involved. Maritime business has a holi...

OPENALEX DOI: https://doi.org/10.4324/9780429261664-30

Destination Management and Marketing Organizations as Enablers of Entrepreneurial Resilience: Co-Creating Organizational Structures and Human Resource Capacity Through Participatory Governance and Emerging Technologies

Georgios Tsoupros, Sotirios Varelas, Ioannis E. Anastasopoulos • Merits (2026)

Destination Management and Marketing Organizations (DMMOs) shape the human resource and technological conditions under which tourism enterprises, including digital ventures, pursue resilience and growth, yet their structures are often desig...

DOAJ Open Access (DOAJ) DOI: 10.3390/merits6030026

Comparative investigation of similar and dissimilar AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced by continuous-drive friction welding

Ibrahim Sabry, Abdel-Hamid Ismail Mourad, Mohamed ElWakil • Journal of Materials Research and Technology (2026)

This study considers continuous-drive friction welding to compare AA6061/AA6061, AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced under the same nominal processing conditions. Optical and scanning electron microscopy, EDS, XR...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2026.09.145

How integrating industrial design in the product development process impacts on company performance

Gerda Gemser, Mark A.A.M. Leenders • Journal of Product Innovation Management (2001)

There is a growing belief that investing in industrial design is beneficial to company performance. This article sheds more light on how and when integrating industrial design in the product development process can enhance a company's compe...

OPENALEX DOI: https://doi.org/10.1016/s0737-6782(00)00069-2

Finite element analysis on the near field properties of metallic cavities with atomic sharpness

Qiyuan Dai, Liang Ma, Li Li, Guangjun Tian • Results in Physics (2023)

Using finite element calculations, we investigated the near field properties of two types of commonly used metal nanostructures (a tip-substrate model representing a scanning tunneling microscope type setup (TS) and a nanoparticle-on-mirror...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.rinp.2023.106360

Development of a New 24-bit High-Performance Chipless RFID Tag for Accurate Identification in IoT Systems

Kawther Mekki, Omrane Necibi, Noureddine Boulejfen, Samia Larguech et al. • IEEE Access (2023)

Chipless RFID has the potential to bring in a paradigm change in industrial applications, notably in the world of the Internet of Things (IoT). This wireless technology permits distant identification, sensing, and tracking, giving tremendou...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2023.3337151

Nanotechnology for parasitic plant control

Alejandro Pérez‐de‐Luque, Diego Rubiales • Pest Management Science (2009)

The field of nanotechnology opens up novel potential applications for agriculture. Nanotechnology applications are already being explored and used in medicine and pharmacology, but interest for use in crop protection is just starting. The d...

OPENALEX DOI: https://doi.org/10.1002/ps.1732

Towards Low‐Voltage and High‐Capacity Conversion‐Based Oxide Anodes by Configuration Entropy Optimization

Dr. Lizhi Qian, Jinliang Li, Gongxu Lan, Dr. Yuan Wang et al. • ChemElectroChem (2023)

Abstract Transition metal oxide (TMO)‐based anodes attract much attention for lithium storage due to the merits of high theoretical capacity, facile synthesis, and easy scale‐up. Moreover, the increased working potential avoids the issue of...

DOAJ Open Access (DOAJ) DOI: 10.1002/celc.202201012

Wearable armband with a floating mobile exploratory electrode at fingertip for on-demand touch-and-measure multilead electrocardiography

Saygun Guler, Emre Aslanger, Murat Kaya Yapici • Wearable Technologies (2025)

Spurred by the global pandemic, research in health monitoring has pivoted towards the development of smart garments, enabling long-term tracking of individuals’ cardiovascular health by continuously monitoring the electrocardiogram (ECG) an...

DOAJ Open Access (DOAJ) DOI: 10.1017/wtc.2025.11

Archaeology of Death

Robert Chapman, Ian Kinnes, Klavs Randsborg (1981)

List of contributors Preface 1. Approaches to the archaeology of death Robert Chapman and Klavs Randsborg 2. The search for rank in prehistoric burials James A. Brown 3. Social configurations and the archaeological study of mortuary practic...

OPENALEX

Quadrupole White-light Sources in an X1.2 Flare Observed by ASO-S/LST/WST and SDO/HMI

Zhichen Jing, Ying Li, Dechao Song, Qiao Li et al. • The Astrophysical Journal (2026)

We present observations of an X1.2 white-light flare on 2023 January 6, which exhibits a rare quadrupolar white-light source configuration. This event was observed by the White-light Solar Telescope (WST; 3600 Å) onboard the Advanced Space-...

DOAJ Open Access (DOAJ) DOI: 10.3847/1538-4357/ae9161

Tera-Hertz Counterparts to Fast Radio Bursts from Coherent Cherenkov Radiation by Tilted Bunches

Ze-Nan Liu, Wei-Yang Wang, Yu-Chen Huang, Zi-Gao Dai • The Astrophysical Journal (2025)

Fast radio bursts (FRBs) are millisecond-duration extragalactic transients characterized by ultrahigh brightness temperatures, suggesting coherent emission mechanisms in extreme astrophysical processes. In this paper, we extend the bunched ...

DOAJ Open Access (DOAJ) DOI: 10.3847/1538-4357/adea76