Reset
Showing 20 of 29 academic articles

Agarose Gel Characterization for the Fabrication of Brain Tissue Phantoms for Infrared Multispectral Vision Systems

Efraín Albor-Ramírez, Miguel Reyes-Alberto, Luis M. Vidal-Flores, Enoch Gutierrez-Herrera et al. • Gels (2023)

Synthetic phantoms that recreate the characteristics of biological tissues are valuable tools for systematically studying and comprehending physiologies, pathologies, and biological processes related to tissues. The reproduction of mechanic...

DOAJ Open Access (DOAJ) DOI: 10.3390/gels9120944

Comparative investigation of similar and dissimilar AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced by continuous-drive friction welding

Ibrahim Sabry, Abdel-Hamid Ismail Mourad, Mohamed ElWakil • Journal of Materials Research and Technology (2026)

This study considers continuous-drive friction welding to compare AA6061/AA6061, AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced under the same nominal processing conditions. Optical and scanning electron microscopy, EDS, XR...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2026.09.145

Flat Plate based- Solar System with a tracking system

M. Abdunnabi, A. Abusalama, M. Algamil, M. Almontaser • Solar Energy and Sustainable Development (2018)

Water heating in Libyan domestic sector represents over 29% of the total electrical consumption. There is a great potential of hot water usage in the industrial and other sectors. Solar energy can play vital role in providing hot water to t...

DOAJ Open Access (DOAJ)

Materials for Total Hip Joint Prostheses: Biaxial Flexural Strength of Two Ceramic Systems

Bojana TABAKOVA, Ivanka KALIMANOVA, Ina YANKOVA, Hristiana NIKOLOVA • The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science (2010)

Total hip joint replacement is one of the most successful orthopaedic surgeries in the last decade. Essential part of total hip joint prostheses is the mobile joint “hemispherical head - hemispherical cup”. Functional properties and durabil...

DOAJ Open Access (DOAJ)

Low-carbon urban transportation: Optimizing mechanical systems for sustainable electric bus and BRT deployment in Kampala

Ismail Kimuli, John Baptist Kirabira • Transportation Engineering (2026)

Kampala faces increasing congestion, air pollution, and dependence on fossil fuels, driven by widespread reliance on diesel minibuses and motorcycle taxis. Existing models—KAMPALA-TIMES, KLAP-TIMES, and GKMA-TIMES–CGE—show strong potential ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.treng.2025.100417

3D Printing parameter optimisation combined with heat treatment for achieving high density and enhanced performance in refractory high-entropy alloys

Deyu Jiang, Miao Luo, Changxi Liu, Yashuo Zhang et al. • Virtual and Physical Prototyping (2025)

In this study, a Ti1.5Nb1Ta0.5Zr1Mo0.5 (TNTZM) high-entropy alloy was fabricated using laser powder bed fusion (LPBF). By integrating 63 sets of parameter trials with machine learning (ML) models, an optimised process window was identified,...

DOAJ Open Access (DOAJ) DOI: 10.1080/17452759.2025.2524524

Design, manufacturing, and performance evaluation of heat pipe with three-segmented composite wick structure

Jiu Yu, Yubo Hu, Yaoxing Peng • Case Studies in Thermal Engineering (2026)

The wick structure functions as a core component for heat pipe (HP) and stands as one of the critical factors that dictate the performance of HP. Consequently, this paper puts forward an three-segmented composite wick structure, which is ma...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2026.107724

Compression and Tensile Testing of L-PBF Ti-6Al-4V Lattice Structures with Biomimetic Porosities and Strut Geometries for Orthopedic Implants

Dimitri P. Papazoglou, Amy T. Neidhard-Doll, Margaret F. Pinnell, Dathan S. Erdahl et al. • Metals (2024)

In an effort to contribute to the ongoing development of ASTM standards for additively manufactured metal lattice specimens, particularly within the field of medicine, the compressive and tensile mechanical properties of biomimetic lattice ...

DOAJ Open Access (DOAJ) DOI: 10.3390/met14020232

Numerical Simulation of an Intramedullary Elastic Nail: Expansion Phase and Load-Bearing Behavior

Giulia Pascoletti, Filippo Cianetti, Giovanni Putame, Mara Terzini et al. • Frontiers in Bioengineering and Biotechnology (2018)

The Marchetti-Vicenzi's nail is an intramedullary device where six curved nails are kept straight by a closing ring in order to allow their insertion into the medullary canal of a long bone; in a following step, these nails stabilize the fr...

DOAJ Open Access (DOAJ) DOI: 10.3389/fbioe.2018.00174

Evaluation of joint and muscle function of paediatric upper and lower extremities

Mohamed Afifi, Mohamed Afifi, Muhammad Uba Abdulazeez, Muhammad Uba Abdulazeez et al. • Frontiers in Bioengineering and Biotechnology (2025)

Road traffic crashes are the leading cause of injuries, disabilities, and fatalities for children and young adults. Extremity joint injuries have been identified as one of the contributing factors to chronic disabilities among children in r...

DOAJ Open Access (DOAJ) DOI: 10.3389/fbioe.2025.1667865

Synthesize and characterization of hybrid aluminium alloy (AA6063) metal matrix composite (HAMMC) with corn cob ash and alumina (Al2O3) reinforcements

Ayenew Amare, Mezigebu Belay, Zewudu Wondimagegn • Journal of Materials Science: Materials in Engineering (2026)

Abstract The use of aluminium matrix composites (AMCs) in advanced engineering applications has increased due to their improved mechanical properties, such as hardness, ultimate tensile strength, toughness, wear, and corrosion resistance. A...

DOAJ Open Access (DOAJ) DOI: 10.1186/s40712-026-00421-0

Injectable mesoporous bioactive glass/sodium alginate hydrogel loaded with melatonin for intervertebral disc regeneration

Ruibang Wu, Leizhen Huang, Qinghong Xia, Zheng Liu et al. • Materials Today Bio (2023)

Intervertebral disc degeneration (IDD) is a major contributing factor to both lower back and neck pain. As IDD progresses, the intervertebral disc (IVD) loses its ability to maintain its disc height when subjected to axial loading. This fai...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.mtbio.2023.100731

Evaluating Load-Conditional Convergence in Lithium-Ion Battery Degradation: A Matched-Group Statistical Framework

Nnamdi C. Aronwora, Chibuzo Nwabufo Okwuosa, Jang-Wook Hur • IEEE Access (2026)

The rate of capacity fade in a lithium-ion battery following a transition to a new discharge current is widely assumed to equal that of a battery that has always operated at the destination current, an implicit premise referred to here as l...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2026.3732470

A Virtual Reading Center Model Using Crowdsourcing to Grade Photographs for Trachoma: Validation Study

Christopher J Brady, R Chase Cockrell, Lindsay R Aldrich, Meraf A Wolle et al. • Journal of Medical Internet Research (2023)

BackgroundAs trachoma is eliminated, skilled field graders become less adept at correctly identifying active disease (trachomatous inflammation—follicular [TF]). Deciding if trachoma has been eliminated from a district or if treatment strat...

DOAJ Open Access (DOAJ) DOI: 10.2196/41233

Analysis and optimal design of low frequency road noise based on new energy MPV vehicle

BIN Shibo; XIE Yunhe; ZHENG Weiguang; WEI Shangjun; GAO Ting; LIU Xuewen • Nantong Daxue xuebao. Ziran kexue ban (2025)

Low-frequency road noise is a primary contributor to in-cabin noise and directly affects overall vehicle comfort. With the rapid development of electric vehicles, this issue has attracted increasing attention from the automotive industry. T...

DOAJ Open Access (DOAJ) DOI: 10.12194/j.ntu.20240724001

Verdi: a framework for implementing and formally verifying distributed systems

James R. Wilcox, Doug Woos, Pavel Panchekha, Zachary Tatlock et al. • ACM SIGPLAN Conference on Programming Language Design and Implementation (PLDI) (2015)

Distributed systems are difficult to implement correctly because they must handle both concurrency and failures: machines may crash at arbitrary points and networks may reorder, drop, or duplicate packets. Further, their behavior is often t...

OPENALEX Open Access DOI: https://doi.org/10.1145/2737924.2737958