Home »
Academic Articles »
C »
Physical model test study on shear strength characteristics of slope sliding surface in Nanfen open-pit mine
Physical model test study on shear strength characteristics of slope sliding surface in Nanfen open-pit mine
Zhigang Tao
(School of Mechanics and Civil Engineering, China University of Mining and Technology-Beijing, Beijing 100083, China; State Key Laboratory of Geomechanics and Deep Underground Engineering, China University of Mining and Technology-Beijing, Beijing 100083, China)
Yu Shu
(School of Mechanics and Civil Engineering, China University of Mining and Technology-Beijing, Beijing 100083, China; State Key Laboratory of Geomechanics and Deep Underground Engineering, China University of Mining and Technology-Beijing, Beijing 100083, China)
Xiaojie Yang
(School of Mechanics and Civil Engineering, China University of Mining and Technology-Beijing, Beijing 100083, China; State Key Laboratory of Geomechanics and Deep Underground Engineering, China University of Mining and Technology-Beijing, Beijing 100083, China)
Yanyan Peng
(School of Civil Engineering, Shaoxing University, Shaoxing 312000, China; Key Laboratory of Rock Mechanics and Geohazards of Zhejiang Province, Shaoxing 312000, China)
Qihang Chen
(School of Civil Engineering, Shaoxing University, Shaoxing 312000, China; Key Laboratory of Rock Mechanics and Geohazards of Zhejiang Province, Shaoxing 312000, China)
Haijiang Zhang
(School of Civil Engineering, Shaoxing University, Shaoxing 312000, China; Key Laboratory of Rock Mechanics and Geohazards of Zhejiang Province, Shaoxing 312000, China; Zhejiang Collaborative Innovation Center for Prevention and Control of Mountain Geologic Hazards, Shaoxing 312000, China; Corresponding author.)
Journal: International Journal of Mining Science and Technology
•
• Elsevier
• ISSN: 2095-2686
Abstract
A physical model for the footwall slope of Nanfen open-pit mine, China was established using a self-developed deep geological engineering disaster model test system. A thermosensitive similar material, paraffin, was selected to simulate a weak structural plane in the slope to reproduce the landslide process. From an experimental perspective, the variation trend of shear strength parameters of weak structural plane and the mechanical support characteristics of NPR (negative Poisson’s ratio) anchor cable under the condition of a large landslide deformation and failure were examined. The results of this model test showed that slope failure has four distinct stages: (1) soil compaction stage, (2) crack generation stage, (3) crack propagation stage, and (4) sliding plane transfixion stage. According to the test results, the rock mechanics parameters of weak surface in the footwall slope of Nanfen open-pit mine were calculated. The cohesion is approximately 1.35 × 105 Pa, and the internal friction angle is approximately 6.33°. During slope failure, the NPR anchor cable experiences a large deformation but no damage occurs, indicating that the NPR anchor cable can be continuously monitored and reinforced during the deformation and failure of landslide. The stress characteristics of NPR anchor cables during the test are consistent with the monitoring results of Newtonian force at the landslide site, proving that NPR anchor cables are effective and reasonable in landslide monitoring and early warning.
Zhigang Tao, Yu Shu, Xiaojie Yang, et al. (2020). "Physical model test study on shear strength characteristics of slope sliding surface in Nanfen open-pit mine". International Journal of Mining Science and Technology. https://doi.org/10.1016/j.ijmst.2020.05.006