Hybrid Fuel Cell—Supercritical CO<sub>2</sub> Brayton Cycle for CO<sub>2</sub> Sequestration-Ready Combined Heat and Power

Journal: Energies • • MDPI AG • ISSN: 1996-1073

Abstract

The low prices and its relatively low carbon intensity of natural gas have encouraged the coal replacement with natural gas power generation. Such a replacement reduces greenhouse gases and other emissions. To address the significant energy penalty of carbon dioxide (CO<sub>2</sub>) sequestration in gas turbine systems, a novel high efficiency concept is proposed and analyzed, which integrates a flame-assisted fuel cell (FFC) with a supercritical CO<sub>2</sub> (sCO<sub>2</sub>) Brayton cycle air separation. The air separation enables the exhaust from the system to be CO<sub>2</sub> sequestration-ready. The FFC provides the heat required for the sCO<sub>2</sub> cycle. Heat rejected from the sCO<sub>2</sub> cycle provides the heat required for adsorption-desorption pumping to isolate oxygen via air separation. The maximum electrical efficiency of the FFC sCO<sub>2</sub> turbine hybrid (FFCTH) without being CO<sub>2</sub> sequestration-ready is 60%, with the maximum penalty being 0.68% at a fuel-rich equivalence ratio (Φ) of 2.8, where Φ is proportional to fuel-air ratio. This electrical efficiency is higher than the standard sCO<sub>2</sub> cycle by 6.85%. The maximum power-to-heat ratio of the sequestration-ready FFCTH is 233 at a Φ = 2.8. Even after including the air separation penalty, the electrical efficiency is higher than in previous studies.

Subjects & Keywords

How to Cite this Article

Rhushikesh Ghotkar, Ellen B. Stechel, Ivan Ermanoski, et al. (2020). "Hybrid Fuel Cell—Supercritical CO<sub>2</sub> Brayton Cycle for CO<sub>2</sub> Sequestration-Ready Combined Heat and Power". Energies. https://doi.org/10.3390/en13195043